MTEDCAR004SAJ-1N2IT

Embedded USB Mass Storage Drive
(e230)
MTEDCAR002SAJ-1M2/1M2IT, MTEDCAR004SAJ-1N2/1N2IT
MTEDCAR008SAJ-1N2/1N2IT, MTEDCAR016SAJ-1N2/1N2IT
MTEDCBR002SAJ-1M2/1M2IT, MTEDCBR004SAJ-1N2/1N2IT
MTEDCBR008SAJ-1N2/1N2IT, MTEDCBR016SAJ-1N2/1N2IT
MTEDCBE002SAJ-1M2/1M2IT, MTEDCBE004SAJ-1N2/1N2IT
MTEDCBE008SAJ-1N2/1N2IT, MTEDCBE016SAJ-1N2/1N2IT
MTEDCAE002SAJ-1M2/1M2IT, MTEDCAE004SAJ-1N2/1N2IT
MTEDCAE008SAJ-1N2/1N2IT, MTEDCAE016SAJ-1N2/1N2IT
Features
Micron
®
NAND Flash
Interface: Universal Serial Bus (USB) Specification,
Revision 2.0
USB support
USB Specification, Revisions 2.0, 1.1
USB Mass Storage Class Specification, Revision
1.0
Performance
Sequential READ
1
: 30 MB/s
Sequential WRITE
1
: 22 MB/s (2GB and 4GB); 28
MB/s (8GB and16GB)
Reliability: >1 million device hours mean time be-
tween failure (MTBF)
Endurance: useful operating life of at least 5 years
under the following conditions:
8760 power-on hours per year
Active 100% of power-on hours
Typical operating conditions
2
: 2GB module: 16
GB/day; 4GB module: 32 GB/day; 8GB module:
64 GB/day; 16GB module: 128 GB/day
Static and dynamic wear-leveling
15-bit error correction code (ECC)
Reliability reporting
Capacity (unformatted)
3
: 2GB, 4GB, 8GB, or 16GB
Form factor
Standard (36.9mm x 26.6mm x 9.6mm)
Low profile (36.9mm x 26.6mm x 5.8mm)
Voltage: 5V ±5% and 3.3V ±5%
Operating temperature
Commercial (0°C to +70°C)
Industrial (–40°C to +85°C)
Notes:
1. Typical transfer rate measured with
H2BENCH 3.6.
2. Assumes that 70% of total usable drive ca-
pacity contains static files.
3. 1GB = 1 billion bytes; formatted capacity is
less.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
Embedded USB Mass Storage Drive (e230)
Features
PDF: 09005aef84970b4f
eusb_MTED_230_embedded.pdf - Rev. D 4/13 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Part Numbering Information
Micron’s embedded USB drives are available in different configurations and densities. Visit www.micron.com for a
list of valid part numbers.
Table 1: Part Number Example
Part Number Category
Micron
Tech-
nology
Product
Family
Drive
Inter-
face
Drive
Form
Factor
Drive
Density
NAND
Flash
Type
Product
Family
Sector
Size
NAND
Compo-
nent
Revi-
sion
Operat-
ing
Temper-
ature
Range
Produc-
tion
Status
MT ED C AE 002 S AJ -1 M 1 IT ES
Table 2: Part Number Information Scheme
Part Number
Category Category Details
Micron Technology Micron Technology
Product Family ED = Embedded drive
Drive Interface C = USB 2.0
Drive Form Factor AE = Embedded USB: 5V standard profile (36.9mm x 26.6mm x 9.6mm)
BE = Embedded USB: 5V low profile (36.9mm x 26.6mm x 5.8mm)
AR = Embedded USB: 3V standard profile (36.9mm x 26.6mm x 9.6mm)
BR = Embedded USB: 3V low profile (36.9mm x 26.6mm x 5.8mm)
Drive Density 002 = 2GB
004 = 4GB
008 = 8GB
016 = 16GB
NAND Flash Type S = SLC
Product Family AJ = Option J
Sector Size 1 = 512-byte
NAND Component M = 8Gb; x8; 3.3V
N = 16Gb; x8; 3.3V
Revision 1 = First generation
2 = Second generation
3 = Third generation
Operating Tempera-
ture Range
Blank = Commercial (0°C to 70°C)
IT = Industrial (40°C to 85°C)
Production Status Blank = Production
ES = Engineering sample
MS = Mechanical sample
Embedded USB Mass Storage Drive (e230)
Features
PDF: 09005aef84970b4f
eusb_MTED_230_embedded.pdf - Rev. D 4/13 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
General Description
Micron embedded universal serial bus (USB) mass storage drives provide 2GB, 4GB,
8GB, or 16GB of USB 2.0-compatible memory storage in a small form factor. The em-
bedded USB drive is an ideal solution for applications that require low cost and high re-
liability. Typical applications include PC caching and boot drives for embedded com-
puting, server, and networking systems.
High performance, reliability, and easy implementation make Micron embedded USBs
an ideal storage solution. To consistently deliver the best possible performance, the em-
bedded USB uses only SLC NAND Flash, and all densities use two x8 NAND channels to
the controller. In addition to being fast, SLC NAND Flash offers solid reliability, coupled
with ECC and wear leveling. The USB system interface is widely available in many sys-
tem designs and is easy to implement, enabling rapid time to market.
The embedded USB consists of two TSOP-packaged Micron NAND Flash components,
a USB controller, and a 10-pin USB connector on a PCB. Different densities are available
depending on the number of die in each package and the density of each NAND Flash
die. The drive operates at 5V ±5% or 3.3V ±5%. It uses industry-standard 10-pin connec-
tors and supports USB Specification, Revision 2.0. It is also backward compatible with
Revision 1.1 and can be used with operating systems that support USB Mass Storage
Class Specification, Revision 1.0.
Figure 1: Functional Block Diagram
USB
controller
Channel 1
Channel 1
Channel 2
NAND data bus
NAND data bus
NAND command
USB
connector
Micron
NAND Flash
Micron
NAND Flash
USB protocol
Table 3: Nominal Package Dimensions, Density, and Weight
Value Unit
Height 9.6 (standard)
5.8 (low profile)
mm
Width 26.6 mm
Length 36.9 mm
Density 2, 4, 8, 16 GB
Unit weight 4.5 g
Embedded USB Mass Storage Drive (e230)
General Description
PDF: 09005aef84970b4f
eusb_MTED_230_embedded.pdf - Rev. D 4/13 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

MTEDCAR004SAJ-1N2IT

Mfr. #:
Manufacturer:
Micron
Description:
Managed NAND SLC 4GB EUSBSSD TSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union