AD9754
–4–
REV. A
ABSOLUTE MAXIMUM RATINGS*
With
Parameter Respect to Min Max Units
AVDD ACOM –0.3 +6.5 V
DVDD DCOM –0.3 +6.5 V
ACOM DCOM –0.3 +0.3 V
AVDD DVDD –6.5 +6.5 V
CLOCK, SLEEP DCOM –0.3 DVDD + 0.3 V
Digital Inputs DCOM –0.3 DVDD + 0.3 V
IOUTA, IOUTB ACOM –1.0 AVDD + 0.3 V
ICOMP ACOM –0.3 AVDD + 0.3 V
REFIO, FSADJ ACOM –0.3 AVDD + 0.3 V
REFLO ACOM –0.3 AVDD +0.3 V
Junction Temperature +150 °C
Storage Temperature –65 +150 °C
Lead Temperature
(10 sec) +300 °C
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods may affect device reliability.
ORDERING GUIDE
Temperature Package Package
Model Range Descriptions Options*
AD9754AR –40°C to +85°C 28-Lead 300 Mil SOIC R-28
AD9754ARU –40°C to +85°C 28-Lead TSSOP RU-28
AD9754-EB Evaluation Board
*R = Small Outline IC; RU = Thin Shrink Small Outline Package.
THERMAL CHARACTERISTICS
Thermal Resistance
28-Lead 300 Mil SOIC
θ
JA
= 71.4°C/W
θ
JC
= 23°C/W
28-Lead TSSOP
θ
JA
= 97.9°C/W
θ
JC
= 14.0°C/W
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD9754 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
(T
MIN
to T
MAX
, AVDD = +5 V, DVDD = +5 V, I
OUTFS
= 20 mA unless otherwise noted)
DIGITAL SPECIFICATIONS
Parameter Min Typ Max Units
DIGITAL INPUTS
Logic “1” Voltage @ DVDD = +5 V
1
3.5 5 V
Logic “1” Voltage @ DVDD = +3 V 2.1 3 V
Logic “0” Voltage @ DVDD = +5 V
1
0 1.3 V
Logic “0” Voltage @ DVDD = +3 V 0 0.9 V
Logic “1” Current –10 +10 µA
Logic “0” Current –10 +10 µA
Input Capacitance 5 pF
Input Setup Time (t
S
) 2.0 ns
Input Hold Time (t
H
) 1.5 ns
Latch Pulsewidth (t
LPW
) 3.5 ns
NOTES
1
When DVDD = +5 V and Logic 1 voltage ≈3.5 V and Logic 0 voltage ≈1.3 V, IVDD can increase by up to 10 mA depending on f
CLOCK
.
Specifications subject to change without notice.
0.1%
0.1%
t
S
t
H
t
PD
t
ST
DB0–DB11
CLOCK
IOUTA
OR
IOUTB
t
LPW
Figure 1. Timing Diagram
WARNING!
ESD SENSITIVE DEVICE