632L3I018M43200

Document No. 008-0328-0 Page 1- 3 Rev. D
www.ctscorp.com
Model 632
HCMOS Clock Oscillator
FEATURES
Standard 3.2mm x 2.5mm 4-Pad Surface Mount Package
HCMOS Output
Fundamental and 3
rd
Overtone Crystal Designs
Frequency Range 1 – 125 MHz
Frequency Stability ±50 ppm Standard, ±25 ppm and ±20 ppm Available
Operating Voltages +1.8Vdc, +2.5Vdc, +2.8Vdc, +3.3Vdc or +5.0Vdc
Operating Temperature to -40°C to +85°C
Output Enable Standard
Tape & Reel Packaging Standard, EIA-418
RoHS/Green Compliant [6/6]
APPLICATIONS
Model 632 is ideal for applications; such as broadband access, Ethernet/Gigabit Ethernet, microprocessors/DSP/FPGA,
networking equipment computers and peripherals, digital video, cameras and other portable devices.
ORDERING INFORMATION
PACKAGING INFORMATION
[reference]
Device quantity is 1k pcs. minimum and 3k pcs. maximum per 180mm reel. 8mm tape width.
1] Consult factory for 6I Stability/Temperature availability.
2] Frequency is recorded with three leading significant digits before the ‘M and 5 significant digits after the ‘M [including zeros].
[Ex. 3.579545 MHz, code as 003M57954; 14.31818 MHz, code as 014M31818; 125 MHz, code as 125M00000]
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
C = -20°C to +70°C
I = -40°C to +85°C
M - indicates MHz and decimal point.
2
FREQUENCY IN MHz
FREQUENCY STA BILITY
6 = ±20ppm
1
5 = ±25ppm
3 = ±50ppm
TEMPERA TURE RANGE
M
SUPPLY VOLTAGE
M = +1.8Vdc
N = +2.5Vdc
T = +2.8Vdc
L = +3.3Vdc
S = +5.0Vdc
632
Document No. 008-0328-0 Page 2 - 3 Rev. D
Model 632
3.2mm x 2.5mm Low Cost
HCMOS Clock Oscillator
ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT
Maximum Supply Voltage V
CC
--0.5-4.0V
Storage Temperature T
STG
- -40 - +100 °C
Frequency Range f
O
- 1.0 - 125 MHz
Frequency Stability
[See Note 1 and Ordering Information]
f/f
O
- - - 20, 25, 50 ± ppm
Aging f/f
O
- - - 3 ± ppm/yr
Operating Temperature
Commercial -20 +70
Industrial -40 +85
Supply Voltage
Model 632M 1.62 1.8 1.98
Model 632N 2.25 2.5 2.75
Model 632T 2.52 2.8 3.08
Model 632L 2.97 3.3 3.63
Model 632S 4.50 5.0 5.50
Supply Current C
L
= 15pF
Model 632M 1.0 MHz to 100 MHz - - 7
[+1.8V]
100.1 MHz to 125 MHz - - 12
Model 632N, 632T 1.0 MHz to 100 MHz - - 10
[+2.5V, +2.8V]
100.1 MHz to 125 MHz - - 20
Model 632L, 632S 1.0 MHz to 100 MHz - - 15
[+3.3V, +5.0V]
100.1 MHz to 125 MHz - - 25
Output Load C
L
--15pF
Output Voltage Levels
Logic '1' Level V
OH
CMOS Load 90%V
CC
--
Logic '0' Level V
OL
CMOS Load - - 10%V
CC
Output Current
Logic '1' Level [M,N,T,L,S] I
OH
V
OH
= 90%V
CC
[1.8V, 2.5/2.8V, 3.3V, 5.0V]
- - -2, -4, -8, -16
Logic '0' Level [M,N,T,L,S] I
OL
V
OL
= 10%V
CC
[1.8V, 2.5/2.8V, 3.3V, 5.0V]
- - +2, +4, +8, +16
Output Duty Cycle SYM @ 50% Level 45 - 55 %
Rise and Fall Time @ 10% - 90% Levels, C
L
= 15pF
Model 632M 1.0 MHz to 20 MHz - - 5
[+1.8V]
20.1 MHz to 125 MHz - - 4
Model 632N, 632T 1.0 MHz to 20 MHz - - 4
[+2.5V, +2.8V]
20.1 MHz to 125 MHz - - 3
Model 632L, 632S 1.0 MHz to 20 MHz - - 3
[+3.3V, +5.0V]
20.1 MHz to 125 MHz - - 2
Start Up Time T
S
Application of V
CC
-- 2ms
Enable Function
Enable Input Voltage
V
IH
Pin 1 Logic '1', Output Enabled 0.7*V
CC
--
Disable Input Voltage
V
IL
Pin 1 Logic '0', Output Disabled - - 0.3*V
CC
Enable Time [M,N,T,L,S] T
PLZ
Pin 1 Logic '1' - - 2 ms
Standby Current I
ST
Pin 1 Logic '0', Output Disabled - - 15 µA
Period Jitter, pk-pk pjpk-pk - - - 40
Phase Jitter, RMS tjrms Bandwidth 12 kHz - 20 MHz - - 1
Notes:
1.
ps
Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and aging.
-
V
mA
ELECTRICAL PARAMETERS
T
A
°C
+25
V
V
CC
± 10 % V
T
R
, T
F
ns
I
CC
mA
TEST CIRCUIT, CMOS LOAD
LVCMOS OUTPUT WAVEFORM
ENABLE TRUTH TABLE
PIN 1 PIN 3
Logic ‘1’ Output
Open Output
Logic ‘0’ High Imp.
Document No. 008-0328-0 Page 3 - 3 Rev. D
Model 632
3.2mm x 2.5mm Low Cost
HCMOS Clock Oscillator
MECHANICAL SPECIFICATIONS
MARKING INFORMATION
1. XX.XX – Frequency in MHz.
2. C – CTS and Pin 1 identifier.
3. ** - Manufacturing Site Code.
4. D – Manufacturing Date Code.
[See Table 1 for codes.]
5. Complete CTS part number, frequency value and
date code information must appear on reel and
carton labels.
PACKAGE DRAWING
NOTES
1. Termination pads (e4). Barrier-plating is nickel [Ni]
with gold [Au] flash plate.
2. Reflow conditions per JEDEC J-STD-020; 260°C
maximum, 20 seconds.
3. MSL = 1.
XX.XX
C**D
SUGGESTED SOLDER PAD GEOMETRY
C
BYPASS
should be 0.01 uF.
D.U.T. PIN ASSIGNMENTS
PIN SYMBOL DESCRIPTION
1 EOH Enable
2 GND Circuit & Package Ground
3 Output RF Output
4 V
CC
Supply Voltage
TABLE I
2001 2005 2009 2013 2017 A B C D E F G H J K L M
2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z
2003 2007 2011 2015 2019 a b c d e f g h j k l m
2004 2008 2012 2016 2020 n p q r s t u v w x y z
DEC
YEAR
AUG SEP OCT NOVAPR MAY JUN JUL
MONTH
JAN FEB MAR

632L3I018M43200

Mfr. #:
Manufacturer:
CTS Electronic Components
Description:
Standard Clock Oscillators 18.432MHz 3.3Volts -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union