2
FX5 Series●1mm Pitch Connectors for Vertical Connection
Note: The 56 contact header is for SH 3 type only.
■Product Number Structure
●Header
t Connector Height
Blank : 6.5mm
3 : 9.5mm
q Series Name : FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type P: Header
r Contact type
SH : Right angle SMT type
FX5 – * P – SH 3
●Receptacle
y Contact type
DSA : Straight through hole type
u Board prefixed pin
Blank : Without board prefixed pin
L : With board Prefixed pin
q Series Name : FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type S: Receptacle
r Contact Sequence
2 : 2 Stages Sequence
t Serial No. : A
FX5 – * S 2 A – DSA L
qtrew
qtrew
yu
■Product Specifications
Ratings
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 100V AC
Operating Humidity Range 40% to 80% Storage Humidity Range 40% to 70%
Items Specifications Conditions
1. Insulation Resistance 100M ohms min. 250V DC
2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute
3. Contact Resistance 50m ohms max. 100mA
4. Vibration Resistance No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm
,
2 hours in each of the 3 directions.
5. Moisture Resistance
Contact resistance: 60m ohms max.
Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of
90% to 95%
6. Temperature Cycle
Contact resistance: 60m ohms max.
Insulation resistance: 100M ohms min.
(-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7. Mating Cycles Contact resistance: 60m ohms max. 500 cycles
8. Resistance to Soldering
heat
No deformation of components affecting
performance.
SMT
Refl ow: At the recommended temperature profi le
Manual soldering: 360°C for 5 seconds
DIP
Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for a long time prior to use. Operating temperature and humidity range includes a
non-conducting state of installed connectors in storage, shipment, or during transportation.
■
Material
Part Material Finish Remarks
Insulator Polyamide Beige UL94V-0
Header Contact Brass Contact area : Gold plated –––––––
Receptacle Contact Phosphor bronze Lead area : Tin plated –––––––
Note : The black dots on the insulater will not affect performance
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
