IHLP-5050CE-06
www.vishay.com
Vishay Dale
Revision: 14-Jul-17
1
Document Number: 34165
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP
®
Commercial Inductors, High Saturation Series,
10 % DCR Tolerance
DESIGN SUPPORT TOOLS click logo to get started
Notes
• All test data is referenced to 25 °C ambient
• Operating temperature range -55 °C to +125 °C
• The part temperature (ambient + temp. rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application
• Rated operating voltage (across inductor) = 75 V
(1)
DC current (A) that will cause an approximate ΔT of 40 °C
(2)
DC current (A) that will cause L
0
to drop approximately 20 %
FEATURES
• Lowest height (3.5 mm) in this package footprint
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/μH, in this package size
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite construction
• IHLP design. PATENT(S): www.vishay.com/patents
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
• Tolerance DCR for current sense applications
• Improved current balance in phased power supplies
• Improved thermal management
• PDA / notebook / desktop / server and battery powered
devices
• High current, low profile POL converters
• DC/DC converters in distributed power systems
•
DC/DC converter for Field Programmable Gate Array (FPGA)
PATENT(S): www.vishay.com/patents
This Vishay product is protected by one or more United States and international patents.
STANDARD ELECTRICAL SPECIFICATIONS
L
0
INDUCTANCE
± 20 % AT 100 kHz,
0.25 V, 0 A
(μH)
DCR
± 10 %
AT 25 °C
(mΩ)
HEAT
RATING
CURRENT
DC TYP.
(A)
(1)
SATURATION
CURRENT
DC TYP.
(A)
(2)
0.60 1.85 29 51
0.68 2.34 28 49
1.0 3.21 24 40
1.5 4.97 19 35
2.2 7.20 16 29
3.3 10.69 12 27
4.7 14.27 10 24
5.6 18.19 9.5 19
10 30.86 7 14
DIMENSIONS in inches [millimeters]
The diagram applies to values
0.6 µH and below.
0.091 ± 0.01
[2.3 ± 0.3]
0.520 ± 0.015
[13.2 ± 0.38] Max.
0.508
[12.9]
Max.
0.138
[3.5] Max.
Typical Pad Layout
0.185 ± 0.01
[4.7 ± 0.3]
0.580
[14.732]
0.325
[8.255]
0.195
[4.95]
The diagram applies to values
0.68 µH and above.
0.520 ± 0.015
[13.2 ± 0.38]
0.087 ± 0.01
[2.2 ± 0.254]
0.508
[12.9]
Max.
0.138
[3.5] Max.
Typical Pad Layout
0.118 ± 0.01
[3.0 ± 0.3]
0.128 [3.3]
0.575
[14.605]
0.325
[8.255]
DESCRIPTION
IHLP-5050CE-06 1.0 μH ± 20 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IHLP5050CEER1R0M06
PRODUCT FAMILY SIZE
PACKAGE
CODE
INDUCTANCE
VALUE
TOL. SERIES
