1. General description
The 74AUP1G18 provides a 1-of-2 non-inverting demultiplexer with 3-state output. The
74AUP1G18 buffers the data on input pin (A) and passes it either to output 1Y or 2Y,
depending on whether the state of the select input pin (S) is LOW or HIGH.
Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire V
CC
range from 0.8 V to 3.6 V. This device ensures a very low
static and dynamic power consumption across the entire V
CC
range from 0.8 V to 3.6 V.
This device is fully specified for partial Power-down applications using I
OFF
.
The I
OFF
circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 0.8 V to 3.6 V
High noise immunity
Complies with JEDEC standards:
JESD8-12 (0.8 V to 1.3 V)
JESD8-11 (0.9 V to 1.65 V)
JESD8-7 (1.2 V to 1.95 V)
JESD8-5 (1.8 V to 2.7 V)
JESD8-B (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F Class 3A exceeds 5000 V
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1000 V
Low static power consumption; I
CC
= 0.9 A (maximum)
Latch-up performance exceeds 100 mA per JESD 78 Class II
Inputs accept voltages up to 3.6 V
Low noise overshoot and undershoot < 10 % of V
CC
I
OFF
circuitry provides partial Power-down mode operation
Multiple package options
Specified from 40 Cto+85C and 40 Cto+125C
74AUP1G18
Low-power 1-of-2 demultiplexer with 3-state deselected
output
Rev. 5 — 3 July 2012 Product data sheet
