OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

1-1393277-8

P1-P3P4-P4
1
11-2013, Rev. 1113
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Power Relay K (Open – Sealed)
Automotive Relays
PCB Single Relays
n
Limiting continuous current 45A
n
Wide voltage range
n
24VDC coil versions available
n
For high current version refer to Power Relay K-S
Typical applications
ABS control, blower fans, car alarm, cooling fan, engine control, fuel pump,
hazard warning signal, heated front screen, heated rear screen, ignition,
lamps front/rear/fog light, interior lights, main switch/supply relay, seat
control, seatbelt pretensioner, sun roof, turn signal, valves, window lifter,
wiper control.
Contact Data
Typical applications Resistive/inductive Resistive/inductive Indicator lamps Headlights, Headlights
loads loads capacitive loads capacitive loads
Contact arrangement 1 form A, 1 NO 1 form C, 1 CO 1 form A, 1 NO 1 form A, 1 NO 1 form C, 1 CO
Rated voltage 12VDC 12VDC 12VDC 12VDC 12VDC
A/B (NO/NC) A/B (NO/NC)
Rated current 45A 45/30A 30A 40A 40/25A
Limiting continuous current
23°C 45A 45/30A 30A 40A 40/25A
85°C 30A 30/25A 25A 25A 25/20A
Limiting making current
1)
100A 100/30A 120A
3)
180A 180/60A
Limiting breaking current
2)
60A 60/30A 60A 60A 60/30A
Contact material AgNi0.15 AgNi0.15 AgSnO
2
AgSnO
2
AgSnO
2
Min. recommended contact load 1A at 5VDC
4)
Initial voltage drop, at 10A, typ./max. 20/300mV
Operate/release time typ. 5/3ms
5)
Electrical endurance >2x10
5
ops. >2x10
5
ops. >2.2x10
6
ops. >10
5
ops. >10
5
ops.
at 13.5VDC, 40A at 13.5VDC, 40A up to 8x21W up to 4x60W up to 4x60W
Mechanical endurance, DC coil >10
7
ops.
1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5VDC for 12VDC or 27VDC for 24VDC load voltages.
2) For a load current duration of maximum 3s for a make/break ratio of 1:10.
3) Corresponds to a peak inrush current on initial actuation (cold filament).
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding.
TE0556-E
Max. DC load breaking capacity
Load limit curve 1: arc extinguishes, during transit time (changeover contact).
Load limit curve 2: safe shutdown, no stationary arc (make contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
2
11-2013, Rev. 1113
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Automotive Relays
PCB Single Relays
Power Relay K (Open – Sealed)
(Continued)
Insulation Data
Initial dielectric strength
between open contacts 500VAC
rms
between contact and coil 500VAC
rms
Other Data
EU RoHS/ELV compliance compliant
Ambient temperature, DC coil -40 to +85°C
6)
Climatic cycling with condensation,
EN ISO 6988 3 cycles, storage 8/16h
Temperature cycling (shock),
IEC 60068-2-14, Na 20 cycles, -40/+85°C (dwell time 1h)
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temperature 55°C
Damp heat constant,
IEC 60068-2-3, method Ca 56 days, upper air temperature 55°C
Degree of protection, IEC 61810 RT 0/II – open version
RT III – immersion cleanable version
Corrosive gas,
IEC 60068-2-42 10 days
IEC 60068-2-43 10 days
Vibration resistance (functional),
IEC 60068-2-6 (sine pulse form),
acceleration, acc. to position 10 to 200Hz, 20 to 40g
7)
Shock resistance (functional),
IEC 60068-2-27 (half sine form single pulses),
acceleration, acc. to position 8ms 30g
7)
Terminal type PCB
Weight
sealed version approx. 22g (0.77oz)
open version approx. 19g (0.67oz)
Solderability (aging 3: 4h/155°C)
for leaded process (Tm = 183°C),
for Pb-free process (Tm = 217°C),
IEC 60068-2-20 Ta, method 1, hot dip 5s, 215°C
Storage conditions according IEC 600688
8)
Packaging unit
sealed version 525 pcs.
open version 500 pcs.
6) See coil operating range DC.
7) No change in the switching state >10μs.
8) For general storage and processing recommendations please refer to our Application
Notes and especially to Storage in the Definitions or at http://relays.te.com/appnotes/
Coil Data
Rated coil voltage 12VDC / 24VDC
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% W
001 12 6.9 1.2 90 1.6
022 24 14.1 2.4 362 1.6
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coils on request.
Coil operating range
Does not take into account
the temperature rise due to
the contact current
E = pre-energization
TE0555-6
Does not take into account the temperature rise due to the contact current
E = pre-energization
1 form A, 1 NO
TE1086-A1
TE1091-B1
Terminal Assignment (Open and Sealed Version)
Bottom view on solder pins
*) Terminal 4 to be bridged
3
11-2013, Rev. 1113
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Automotive Relays
PCB Single Relays
Power Relay K (Open – Sealed)
(Continued)
ø 2.3 +0.1
ø 2.3 +0.1
ø 2.3 +0.1
2.3 ±0.2
13.3 ±0.2
2.2 ±0.1
3.3 ±0.1
12.1 ±0.1
5.4
2.4
1.3 +0.1
6.0 ±0.2
10.2 ±0.2
16.0 ±0.3
1.0 +0.05
1.0 +0.0
5
ø 2.1 +0.1
TE0575-K2
Terminals tinned
Assembly and
positioning aid
additional tin tops
max. 1.5 mm
3.0 ±0.5 *)
3.4 ±0.1
3.4 ±0.1
*)
8.5 ±0.2
26.1 ±0.4
21.1 ±0.4
21.2 ±0.3
0.55 ±0.25
2.5 – 3.0
TE0579-I2
ø 2.3 +0.1
ø 2.3 +0.1
ø 2.1 +0.1
ø 2.3 +0.1
2.3 ±0.2
13.3 ±0.2
2.2 ±0.1
3.3 ±0.1
12.1 ±0.1
6.6 ±0.3
3.4 ±0.6
ø 1.3 +0.1
6.0 ±0.2
10.2 ±0.2
16.0 ±0.3
TE0580-L2
Terminals tinned
additional tin tops
max. 1.5 mm
*)
3.0 ±0.5 *)
2.5 – 3.0
2.5 ±0.4
9.2 ±0.4
23.3 ±0.7
18.9 ±0.3
18.0 ±0.5
2.4 ±0.8
18.6 ±0.65
TE2179-42
Mounting Hole Layout
Bottom view on solder pins
Power Relay K open version
Dimensions
Power Relay K open version Power Relay K sealed version
Power Relay K sealed version
P1-P3P4-P4

1-1393277-8

Mfr. #:
Buy 1-1393277-8
Manufacturer:
TE Connectivity / Potter & Brumfield
Description:
General Purpose Relays V23076A3022C132
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet