R0E000200CKA00

User’s Manual
REJ10J2124-0100 Rev.1.00 Page 1 of 4
Apr. 01, 2010
R0E000200CKA00
38-Pin to 14-Pin Conversion Adapter for the E20 Emulator
1. Outline
The R0E000200CKA00 adapter is used to connect the 38-pin
0.5-mm pitch connector on the head of the E20-specific user-
system interface cable to 14-pin 2.54-mm pitch connectors.
Using this conversion adapter allows connection of the E20
even if your system only has the 14-pin connector for the E1.
2. Package Components
Before using this product, confirm that the R0E000200CKA00
package contains the following items.
(1) R0E000200CKA00 conversion adapter...................... 1 pc.
(2) R0E000200CKA00 user's manual (this document)
3. Specifications
Table 1 Specifications
Item Description
2-5767004-2
(manufactured by Tyco Electronics
Corporation)
Upper connector
(CN1)
Guaranteed number of times for
insertion and removal: 50
XG4H-1431
(manufactured by OMRON
Corporation)
Lower connector
(CN2)
Guaranteed number of times for
insertion and removal: 50
4. Usage (See Figure 2)
The R0E000200CKA00 is connected between the 38-pin
connector on the head of the user-system interface cable (for
the E20) and a 14-pin connector on the user system as shown
in figure 2.
5. 5. Restrictions
Trace signals will not be connected if you are using the
R0E000200CKA00, so the following functions specific to
the E20 are not available.
(1) External trace output (but internal tracing is available)
(2) Realtime RAM monitoring
REJ10J2124-0100
Rev.1.00
Apr. 01, 2010
Figure 1 External View of the R0E000200CKA00
Figure 2 Usage of the R0E000200CKA00
User-system interface cable for
the E20 (R0E000200KCT00)
38-pin to 14-pin conversion
adapter (R0E000200CKA00,
i.e. this product)
14-pin connector on the user
system (7614-6002
manufactured by Sumitomo 3M
Limited or 2514-6002
manufactured by 3M Limited)
CN1
CN2
User system
Pin 1
Pin 13
R0E000200CKA00 User’s Manual
REJ10J2124-0100 Rev.1.00 Page 2 of 4
Apr. 01, 2010
6. Precautions
IMPORTANT
Notes on This Product:
z We cannot accept any requests for repairs.
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
7. Correspondence between Pins of CN1 and CN2
Table 2 Correspondence between Pins
CN1 Pin No. CN2 Pin No. CN1 Pin No. CN2 Pin No. CN1 Pin No. CN2 Pin No.
1 6 15 1 29
2 10 16
30
3 4 17 9 31
4
18
32
5 14 19 11 33
6
20
34
7
21 3 35
8 7 22
36
9 13 23
37
10
24
38
11 5 25
GND bus lead 2, 12
12
26
13
27
14 8 28
Note: ‘ ‘ indicates that the pin is not used.
8. Preparations
Figure 3 shows the limit on the heights of components mounted around the connector on the user system. Take this limit into account
when designing your own system.
Figure 3 Limit on Height of Components Mounted on the User System
An upper limit applies to the heights of components mounted around the connector on the user system.
This limit is only applicable with the following types of connector.
Type number: 7614-6002 (manufactured by Sumitomo 3M Limited)
2514-6002 (manufactured by 3M Limited)
The emulator is connected from this direction.
Area with limit on mounted components
(heights must be no greater than 10 mm)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
5 mm
5 mm
5 mm
5 mm
CAUTION
R0E000200CKA00 User’s Manual
REJ10J2124-0100 Rev.1.00 Page 3 of 4
Apr. 01, 2010
Regulatory Compliance Notices
European Union regulatory notices
Environmental Compliance and Certifications:
WEEE Directive (2002/96/EC)
Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic Equipment,
(WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed of as household waste but
through your locally recognized recycling or disposal schemes. As part of our commitment to environmental responsibility Renesas also
offers to take back the equipment and has implemented a Tools Product Recycling Program for customers in Europe. This allows you to
return equipment to Renesas for disposal through our approved Producer Compliance Scheme. To register for the program, click here
http://www.renesas.com/weee
".

R0E000200CKA00

Mfr. #:
Manufacturer:
Renesas Electronics
Description:
Sockets & Adapters 38 to 14Pin Adapter for the E20 Emulator
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet