TB62215AFG
4 2012-6-4
Pin Function
Pin number Pin name Function
1 CW/CCW Normal rotation/reversal of motor operation
2 MO_OUT Electric corner monitor terminal
3 D_MODE1 Excitation setting terminal 1
4 D_MODE2 Excitation setting terminal 2
5 CLK_IN
Clock input terminal that decides rotational speed of motor. An electric corner advances
by standing up.
6 ENABLE Output ON (5V)/turning off (GND) switch terminal of A and B channel.
7 RESET An electric corner is initialized.
8 RS_A
Sense resistance connection terminal for current value setting of A channel output
(Power supply terminal)
9 NC No connection
10 OUT_A A channel output plus terminal
11 NC No connection
12 PGND Power GND for motor drive
13 OUT_A- A channel output minus terminal
14 PGND Power GND for motor drive
15 PGND Power GND for motor drive
16 OUT_B- B channel output minus terminal
17 PGND Power GND for motor drive
18 NC No connection
19 OUT_B B channel output plus terminal
20 NC No connection
21 RS_B
Sense resistance connection terminal for current value setting of B channel output
(Power supply terminal)
22 V
M
Motor power supply monitor terminal
23 V
CC
Monitor terminal for internal generation 5V
24 NC
No connection
25 NC
No connection
26 VREF_B Bias terminal for current value setting of B channel output
27 VREF_A Bias terminal for current value setting of A channel output
28 OSCM Setting of frequency of oscillation circuit terminal for chopper