NCP690, NCP691, NCP692, NCV8690
http://onsemi.com
5
Table 3. ABSOLUTE MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage (Note 1) V
IN
−0.3 to 6.5 V
Chip Enable Voltage V
EN
−0.3 to 6.5 V
Output Voltage V
OUT
−0.3 to 6.5 V
Output Voltage / Sense Input, (SNS pin) V
SNS
−0.3 to 6.5 V
Electrostatic Discharge
Human Body Model
ESD
4000
V
Machine Model 200
Maximum Junction Temperature T
J_MAX
150
_C
Storage Temperature Range T
STG
−65 to 150
_C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
NOTE: This device series contains ESD protection and exceeds the following tests:
ESD HBM tested per JEDEC standard: JESD22−A114
ESD MM tested per JEDEC standard: JESD22−A115
Latch–up Current Maximum Rating: ≤ 150 mA per JEDEC standard: JESD78
Table 4. PACKAGE THERMAL CHARACTERISTICS
Rating Condition Symbol Value Unit
Thermal Resistance,
Junction−to−Ambient (Note 2)
DFN6 3x3, 1 oz Cu 64 mm
2
Cu
645 mm
2
Cu
R
q
JA
169
70
°C/W
DFN6 3x3, 2 oz Cu 64 mm
2
Cu
645 mm
2
Cu
R
q
JA
151
62
°C/W
Thermal Resistance, Junction−to−Pin
R
q
JL
15
°C/W
Table 5. OPERATING RANGES
Rating Symbol Value Unit
Operating Input Voltage (Notes 3 and 4) V
IN
1.5 to 6.0 V
Operating Junction Temperature Range T
J
−40 to 125 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
1. Minimum V
IN
= (V
OUT
+ V
DO
) or 1.5 V, whichever is higher.
2. Soldered on FR4 copper area, please refer to Applications Section for Safe Operating Area.
3. Minimum V
IN
= (V
OUT
+ V
DO
) or 1.5 V, whichever is higher.
4. Refer to Electrical Characteristics and Application Information for Safe Operating Area.