ICS501
LOCO™ PLL CLOCK MULTIPLIER CLOCK MULTIPLIER
IDT™ / ICS™
LOCO™ PLL CLOCK MULTIPLIER 8
ICS501 REV Q 092209
Ordering Information
*NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility
for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses
are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range,
high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to
change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical
instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
501M* ICS501M Tubes 8-pin SOIC 0 to +70
°
C
501MT* ICS501M Tape and Reel 8-pin SOIC 0 to +70
°
C
501MI* ICS501I Tubes 8-pin SOIC -40 to +85
°
C
501MIT* ICS501I Tape and Reel 8-pin SOIC -40 to +85
°
C
501MLF 501MLF Tubes 8-pin SOIC 0 to +70
°
C
501MLFT 501MLF Tape and Reel 8-pin SOIC 0 to +70
°
C
501MILF 501MILF Tubes 8-pin SOIC -40 to +85
°
C
501MILFT 501MILF Tape and Reel 8-pin SOIC -40 to +85
°
C
501G* 501G Tubes 8-pin MSOP 0 to +70
°
C
501GT* 501G Tape and Reel 8-pin MSOP 0 to +70
°
C
501GI* 501GI Tubes 8-pin MSOP -40 to +85
°
C
501GIT* 501GI Tape and Reel 8-pin MSOP -40 to +85
°
C
501GLF 501GL Tubes 8-pin MSOP 0 to +70
°
C
501GLFT 501GL Tape and Reel 8-pin MSOP 0 to +70
°
C
501GILF 1GIL Tubes 8-pin MSOP -40 to +85
°
C
501GILFT 1GIL Tape and Reel 8-pin MSOP -40 to +85
°
C
501-DWF - Die on uncut, probed wafers 0 to +70
°
C
501-DPK - Tested die in waffle pack 0 to +70
°
C
501E-DPK - Tested die in waffle pack 0 to +70
°
C
