Page 2 of 4
Date: 06 January 2016 / Ver. 1.01
Premium 3D Printer Filament—PETG
Storage and Shelf Life
Store between 18 to 27 °C [65–80 °F] and protect from direct heat or sunlight. Keep sealed in an air tight
container, away from humidity.
1 y from the date of purchase
Variable depending on storage conditions
Health and Safety
Please see the Premium 3D Printer Filament-PETG Safety Data Sheet (SDS) for more details on
transportation, storage, handling and other security guidelines.
Environmental Impact: This product doesn’t have any known environmental toxicity.
This product meets the European Directive
2011/65/EU Annex II (ROHS);
recasting 2002/95/EC.
Health and Safety: This product is not considered to be hazardous for human health under normal use.
It is widely used in the packing and food industry.
Approximate HMIS and NFPA Risk Ratings Legend:
0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)