©1994 Fairchild Semiconductor Corporation www.fairchildsemi.com
74ABT125 Rev. 1.4.0 2
74ABT125 — Quad Buffer with 3-STATE Outputs
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Note:
1. Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Rating
T
STG
Storage Temperature –65°C to +150°C
T
A
Ambient Temperature Under Bias –55°C to +125°C
T
J
Junction Temperature Under Bias –55°C to +150°C
V
CC
V
CC
Pin Potential to Ground Pin –0.5V to +7.0V
V
IN
Input Voltage
(1)
–0.5V to +7.0V
I
IN
Input Current
(1)
–30mA to +5.0mA
V
O
Voltage Applied to Any Output
Disabled or Power-Off State –0.5V to 5.5V
HIGH State –0.5V to V
CC
Current Applied to Output in LOW State (Max.) twice the rated I
OL
(mA)
DC Latchup Source Current (Across Comm Operating Range) –300mA
Over Voltage Latchup (I/O) 10V
Symbol Parameter Rating
T
A
Free Air Ambient Temperature –40°C to +85°C
V
CC
Supply Voltage +4.5V to +5.5V
∆
V
/
∆
t Minimum Input Edge Rate
Data Input 50mV/ns
Enable Input 20mV/ns