CPR1027R00JF10 Datasheet CPR1027R00JF10, CPR073R900KE10, CPR10R4300KE10 | P1-P3

CPR

www.vishay.com

Vishay Dale

Product is End of Life Jan-2016 and Replaced by CPR High Volume

Revision: 11-Feb-16

Document Number: 30219

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Wirewound Resistors, Commercial Power, Radial Terminals

Please reference the Vishay Dale closest equivalent:

CPR High Volume (www.vishay.com/doc?30261).

Notes

• There may be slight differences between the CPR product and

the CPR High Volume product.

• See the cross-reference file for a complete list of differences and

part number crosses:

www.vishay.net/files/Cross-Reference%20Data-without%20PC

N%20-%20%20PCN-DR-020-2015%20Rev%200.pdf.

FEATURES

• Direct mounting on printed circuit board

• Circuit board lock-in mounting tabs

• High performance for low cost

• Meets or exceeds requirements of EIA

Standard RS-344

• Special inorganic potting compound and

ceramic case provide high thermal conductivity

in a fireproof package

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non-RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details.

Note

• Wirewound CPR resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and

resistive functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using

the e-mail address at the bottom of this page for design assistance.

Note

(1)

Only for 3 W and 5 W sizes.

Available

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

HISTORICAL

MODEL

POWER RATING

40 °C

RESISTANCE

RANGE



TOLERANCE

± %

WEIGHT

(typical)

CPR03 CPR-3 3 0.1 to 1K 5, 10 5.6

CPR05 CPR-5 5 0.1 to 1K 5, 10 6.6

CPR07 CPR-7 7 0.1 to 1.429K 5, 10 9.4

CPR10 CPR-10 10 0.1 to 2K 5, 10 10.0

CPR15 CPR-15 15 0.1 to 2K 5, 10 20.3

CPR20 CPR-20 20 0.15 to 2.855K 5, 10 25.6

TECHNICAL SPECIFICATIONS

PARAMETER UNIT CPR RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 300 for 1.0  and above; ± 600 for less than 1.0 

Short Time Overload - 5 x rated power for 5 s

Terminal Strength lb 10 minimum

Dielectric Withstanding Voltage V

1000

Maximum Working Voltage V (P x R)

1/2

Operating Temperature Range °C -65 to +275

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPR0515R00JE14

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

CPR03

CPR05

CPR07

CPR10

CPR15

CPR20

R = decimal

K = thousand

R1500 = 0.15 

1K500 = 1500 

H = ± 3.0 %

J = ± 5.0 %

K = ± 10.0 %

E14 = lead (Pb)-free bulk

(1)

E31 = lead (Pb)-free four layer bulk

(1)

E10 = lead (Pb)-free foam pack

(dash number)

(up to 3 digits)

from 1 to 999

as applicable

B14 = tin/lead bulk

(1)

B31 = tin/lead four layer bulk

(1)

F10 = tin/lead foam pack

Historical Part Numbering example: CPR-5 15  5 % B14

CPR-5 15  5 % B14

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

PR0515R00JE14C

CPR

www.vishay.com

Vishay Dale

Product is End of Life Jan-2016 and Replaced by CPR High Volume

Revision: 11-Feb-16

Document Number: 30219

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches [millimeters]

MATERIAL SPECIFICATIONS

Element: copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

Core: woven fiberglass

Body: steatite ceramic case with inorganic potting

compound

Terminals: tin/lead plated CRS (Lead (Pb)-free will be

100 % tin)

Part Marking: DALE, model, wattage, value, tolerance, date

code

DERATING

GLOBAL

MODEL

DIMENSIONS in inches [millimeters]

± 0.040

[1.02]

± 0.031

[0.787]

± 0.031

[0.787]

+ 0.080 [2.03]

- 0.040 [1.02]

± 0.012

[0.305]

± 0.008

[0.203]

± 0.060

[1.52]

CPR03

0.906

[23.01]

0.375

[9.53]

0.375

[9.53]

0.394

[10.01]

0.287

[7.29]

0.055

[1.40]

0.500

[12.70]

CPR05

1.060

[26.92]

0.375

[9.53]

0.360

[9.14]

0.394

[10.01]

0.287

[7.29]

0.055

[1.40]

0.590

[14.99]

CPR07

1.398

[35.51]

0.375

[9.53]

0.360

[9.14]

0.984

[24.99]

0.287

[7.29]

0.055

[1.40]

0.886

[22.50]

CPR10

1.888

[47.96]

0.375

[9.53]

0.360

[9.14]

0.984

[24.99]

0.287

[7.29]

0.055

[1.40]

1.380

[35.05]

CPR15

1.888

[47.96]

0.500

[12.70]

0.500

[12.70]

1.180

[29.97]

0.394

[10.01]

0.106

[2.69]

1.280

[32.51]

CPR20

2.498

[63.45]

0.500

[12.70]

0.500

[12.70]

1.180

[29.97]

0.394

[10.01]

0.106

[2.69]

1.870

[47.50]

0.020 ± 0.005

[0.508 ± 0.127]

Material

thickness

0.180 ± 0.010

[4.57 ± 0.254]

Maximum

misalignment D

5°

RATED POWER IN %

AMBIENT TEMPERATURE IN °C

100

120

- 55 75 275- 25 175

225

125

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS (EIA RS-344)

Thermal Shock -55 °C to +275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R

Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R

Dielectric Withstanding Voltage 1000 V

RMS

for 1 min ± (2.0 % + 0.05 ) R

Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R

Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R

Load Life 1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (10.0 % + 0.05 ) R

Terminal Strength 10 pounds in axial direction for 30 s ± (2.0 % + 0.05 ) R

Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (4.0 % + 0.05 ) R

Legal Disclaimer Notice

www.vishay.com

Vishay

Revision: 08-Feb-17

Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

P1-P3

CPR1027R00JF10

Mfr. #:

Buy CPR1027R00JF10

Manufacturer:

Vishay

Description:

Wirewound Resistors - Through Hole CPR-10 27 5% F10

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

CPR1027R00JF10

CPR1027R00JF10

Products related to this Datasheet