OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

JANTXV1N4489

P1-P3P4-P5
Fine Adjust Applicator for Micro-Fit 3.0™ Crimp Terminals
Doc No: ATS-639018900 Release Date: 08-17-07 UNCONTROLLED COPY Page 1 of 5
Revision: C Revision Date: 08-30-10
FineAdjust
Applicator
Application Tooling
Specification Sheet
Order No. 63901-8900
FEATURES
Directly adapts to most automatic wire processing machines
Quick punch removal with the push of a button for fast and easy tooling change
Applicator designed to industry standard mounting and shut height 135.80mm (5.346")
Quick set-up time; plus the crimp height, track and feed adjustments can be set without removing the applicator
from the press
Fine adjustment allows users to achieve target with little effort by adjusting in increments of .015mm (.0006") for
conductor crimp height and .063mm (.0025") for insulation height
Independent adjustment rings allow users to quickly adjust the conductor or insulation crimp height without
affecting each other
SCOPE
Products: Micro-Fit 3.0™ Crimp Terminal, Male and Female, 20-24 AWG.
Terminal
Series No.
Terminal Order No.
Wire Size
Insulation Diameter
Strip Length
IPC/WHMA-A620 (1) Terminal (2)
AWG mm² mm In. mm In. mm In.
43030
43030-0001
43030-0051
20-24
0.50-0.20
0.91-1.09
.036-.043
0.90-1.85
.035-.073
2.54-2.92
.100-.115
43030-0002
43030-0052
43030-0003
43030-0053
43030-1001
43031
43031-0001
43031-0051
20-24
0.50-0.20
0.91-1.09
.036-.043
0.90-1.85
.035-.073
2.54-2.92
.100-.115
43031-0002
43031-0052
43031-0003
43031-0053
43031-0017
43031-0102
43031-0018
43031-0103
44372 44372-0002
44372-3606
20-24
0.50-0.20
0.91-1.09
.043-.051
0.90-1.85
.035-.073
2.54-2.92
.100-.115
45773
45773-0001
45773-0002
20-24
0.50-0.20
0.91-1.09
.036-.043
0.90-1.85
.035-.073
2.54-2.92
.100-.115
45773-0003
45773-0053
(1) To achieve optimum IPC-A620 Class 2 insulation crimps, use this insulation OD range
(2) Overall insulation OD specification for terminal
Applicator 63901-8800 should be used for insulation OD 1.10-1.30mm (.043-.051 inch)
Applicator 63900-4500 should be used for insulation OD 1.30-1.85mm (.051-.073 inch)
Fine Adjust Applicator for Micro-Fit 3.0™ Crimp Terminals
Doc No: ATS-639018900 Release Date: 08-17-07 UNCONTROLLED COPY Page 2 of 5
Revision: C Revision Date: 08-30-10
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
BELL MOUTH
COND.CRIMP
HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
CUT-OFF TAB
SEAM
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.
CRIMP SPECIFICATION
Terminal Series No.
Bell mouth Cut-off Tab Maximum Conductor Brush
mm In. mm In. mm In.
43030 43031
0.05-0.40 .002-.016 0.15 .006 0.20-0.80 .008-.031
44372 45773
Terminal Series No.
Bend up Bend down
Twist Roll
Punch Width mm (Ref)
Seam
Seam shall not be open
and no wire allowed out
of the crimping area
Conductor
Insulation
Degree Degree mm In mm In
43030 3 3 4 8 1.40
.055
1.40
.055
43031 3 3 4 8 1.40
.055
1.40
.055
44372 3 3 4 8 1.40
.055
1.40
.055
45773 3 3 4 8 1.40
.055
1.40
.055
After crimping, the conductor profile should measure the following.
Terminal Series No.
Wire Size Conductor Crimp Height
Insulation Crimp Height
Pull Force Minimum
AWG
mm
2
mm In. mm In. N Lb.
43030
20 0.50 0.91-0.99 .036-.039 2.30 max .090 max 57.9 13.0
22 0.35 0.84-0.91 .033-.036 2.30 max .090 max 35.6 8.0
24 0.20 0.79-0.84 .031-.033 2.30 max .090 max 22.3 5.0
43031
20 0.50 0.91-0.99 .036-.039 2.30 max .090 max 57.9 13.0
22 0.35 0.84-0.91 .033-.036 2.30 max .090 max 35.6 8.0
24 0.20 0.79-0.84 .031-.033 2.30 max .090 max 22.3 5.0
44372
20 0.50 0.91-0.99 .036-.039 2.30 max .090 max 57.9 13.0
22 0.35 0.84-0.91 .033-.036 2.30 max .090 max 35.6 8.0
24 0.20 0.79-0.84 .031-.033 2.30 max .090 max 22.3 5.0
45773
20 0.50 0.91-0.99 .036-.039 2.30 max .090 max 57.9 13.0
22 0.35 0.84-0.91 .033-.036 2.30 max .090 max 35.6 8.0
24 0.20 0.79-0.84 .031-.033 2.30 max .090 max 22.3 5.0
Pull Force should be measured with no influence from the insulation crimp.
The above specifications are guidelines to an optimum crimp.
Fine Adjust Applicator for Micro-Fit 3.0™ Crimp Terminals
Doc No: ATS-639018900 Release Date: 08-17-07 UNCONTROLLED COPY Page 3 of 5
Revision: C Revision Date: 08-30-10
PARTS LIST
FineAdjust Applicator 63901-8900
Item Order No Engineering No. Description Quantity
Perishable Tooling
63901-8970 63901-8970 Tool Kit (All “Y” Items) REF
1
63444-1421 63444-1421 Conductor Punch 1 Y
2
63445-1436 63445-1436 Conductor Anvil 1 Y
3
63446-1406 63446-1406 Insulation Punch 1 Y
4
63445-1409 63445-1409 Insulation Anvil 1 Y
5
63443-0002 63443-0002 Cut-Off Plunger 1 Y
6
63443-0012 63443-0012 Front Plunger Retainer 1 Y
Other Components
7
11-18-4083 60707-8 Feed Guide 1
8
11-24-1067 4996-4 Cut-off Plunger Spring 1
9
11-40-4039 8302-5 Front Plunger Striker 1
10
63443-0009 63443-0009 Front Scrap Chute 1
11
63443-0024 63443-0024 Key 1
12
63443-0090 63443-0090 Wire Stop 1
13
63443-1703 63443-1703 17.30mm Height Spacer 1
14
63443-2216 63443-2216 16.00mm Coarse Spacer 1
15
63443-2302 63443-2302 3.10mm Fine Spacer 1
16
63443-6111 63443-6111 Rear Cover 1
Frame
17
63800-4901 63800-4901 Top 1
18
63801-3281 63801-3281 Base 1
19
63801-4650 63801-4650 Track 1
Hardware
20
N/A N/A M3 by 6 Long SHCS 2**
21
N/A N/A M3 by 6 Long FHCS 1**
22
N/A N/A M4 by 6 Long SHCS 2**
23
N/A N/A M4 by 12 Long BHCS 2**
24
N/A N/A M4 by 50 Long SHCS 2**
25
N/A N/A M5 by 12 Long SHCS 1**
26
N/A N/A #10-32 by 3/8”Long Flat Point SSS 1**
27
N/A N/A #10-32 Hex Jam Nut 1**
** Available from an industrial supply company such as MSC (1-800-645-7270).
P1-P3P4-P5

JANTXV1N4489

Mfr. #:
Buy JANTXV1N4489
Manufacturer:
Microchip / Microsemi
Description:
Zener Diodes Zener Diodes
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet