132A505 Datasheet 110A108B, 132A505 | P1-P3

Specifications for "N" Connectors

_____________________________

N Series connectors are medium sized, and weatherproof. The coupling method utilizes a screw system designed for use at

frequencies up to microwave. These connectors are particularly useful where precision performance is necessary such as in

test equipment, satellite communications, MATV, computer LAN systems, and other high-tech electronic equipment.

Because of the quality manufacturing tolerances these connectors ensure excellent performance throughout 0-18GHz.

MATERIALS

Connector Parts Material Equivalent Standard †

Connector Body and Parts Brass ISOCuZn38Pb2 Body Part

Male Contact Pin Brass QQ-B-626

Outer Contact Brass QQ-B-750

Socket Contact

Beryllium Copper Phosphor

Bronze

QQ-C-530/MIL-H-7199

CuBe2

Crimp Ferrule Annealed Copper QQ-C-576

Insulators, Standard Versions Teflon Delrin

L-P403/BS4271 Grade B

Rubber Gaskets Silicone Rubber ASTM-E1418PSI

Plating Nickel (Silver Optional) MIL-G-45204

ELECTRICAL

Requirement Performance

Test †

Specification

Impedance

50  75

-----

Frequency Range 0-18 GHz 0-1 GHz -----

VSWR 1.30 Max. MIL- C-39012

RF Insertion Loss 0.2 db Max. at 3 GHz MIL- C-39012

RF Leakage -90 db Min. at 2-3 GHz MIL- C-39012

Test Voltage (At Sea Level) 2500V rms MIL-STD-202

Working Voltage (At Sea level) 1000V rms MIL-STD-202

Insulation Resistance 5000 Megohm Min. MIL-STD-202

Contact Resistance 3 Megohm Max. MIL-C-39012

MECHANICAL & ENVIRONMENTAL

Requirement Performance

Test †

Specification

Durability 500 Insertions & Extractions Min. MIL-C-39012

Shock 100 G MIL-STD-202

Vibration 20 G from 80-2000 Hz MIL-STD-202

Cable Retention (Cable Types) 60 lbs. Minimum Pull Test MIL-C-39012

Coupling Nut 100 lbs. Maximum MIL-C-39012

Temperature Range

Teflon: -55 to +199 C Delrin: -40 to

+85 C

----------

Moisture Resistance Continuous Test MIL-STD-202

Salt Spray 48 Hours MIL-STD-202

†Products are made to conform to the Mil standard but are for commercial applications and not QPL

_____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 19 -

cmpliant

RoHS compliant REQUEST QUOTE REQUEST DRAWING

o"N" Connectors

____________________________

Cable Plugs

“N” cable plugs are available in solder/clamp, solder/crimp, and twist-on versions to satisfy the installer’s preference.

Standard cable sizes are facilitated with these connectors for applications from satellite TV to Ethernet LAN installations.

Part Number Descri

tion RG/U Cable

No.

110A108A

Solder/Clamp Plug 6A 88

110A108B

Solder/Clamp Plug 8, 213 88

110A108F

Solder/Clamp Plug 58 88

110A108G

Solder/Clamp Plug 59, 62 88

110A205A

Solder/Crimp Plug 6A 89

110A205B

Solder/Crimp Plug 8, 213 89

110A205F

Solder/Crimp Plug 58 89

110A205G

Solder/Crimp Plug 59, 62 89

110A404B2

Twist-On Plug Thick-Net 90

110A404B3

Twist-On Plug Thick-Net Plenum 90

Fig. 88

Fig. 89

Fig. 90

Jacks

Two cable jacks and one panel jack style are available as standard items. Other types are available as special order items.

The cable jacks utilize the clamp/solder method of assembly and the panel jack will facilitate any cable size by soldering

the center conductor to the connector’s solder-cup contact.

Fig. 91 Fig. 92

Part

Number

Description

RG/U

Cable

Fig.

No.

120A108B

Cable Jack, Solder Clamp 8A, 11 91

120A108F

Cable Jack, Solder Clamp 58, 58A, 58B 91

120A108G

Cable Jack, Solder Clamp 59, 62 91

127A577 Panel Jack, Solder Cup Any 92

V-Bite ® PC Edge Mount

The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge

mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount

and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector

locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points.

The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for

reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other

interfaces available. See “F”, BNC Twin, TNC and N sections.

Part

Number

Description

Fig.

No.

161V504E

N type Edge Mount Jack (TFE Insul for reflow) 98

161V504EFT

N type Edge Mount Jack w/ Flange and Threads (TFE Insul

for reflow)

162V504E

N Type Edge Mount Plug (TFE Insul for reflow) 100

RoHS compliant REQUEST QUOTE REQUEST DRAWING

Fig. 98 Fig. 99 Fig. 100

Adapters & Terminator

Standard configurations of adapters are machined brass with attractive nickel plating. All contacts are gold plated brass

(males) and phosphor bronze (females).

Part

Number

Description

Fig.

No.

132A505 Female/Female Inline 97A

143A505 F/M/F “T” Adapter 93

145A505 F/F/F “T” Adapter 94

151A505 F/M Right Angle Adapter 95

130A5011

Male/Male Inline (Tri-Plate)

97B

132A5011 Female/Female (Tri-Plate) 97C

TC1028 50W Female 96

RoHS compliant

REQUEST QUOTE

REQUEST DRAWING

Fig. 95 Fig. 93

Fig. 97A Fig. 97B Fig. 97C Fig. 94 Fig. 96

N to 7/16 Adapter Kit

7/16 Adapter Kit ADPT3PA is a 8 piece kit containing 7/16 to N, N to N and 7/16 to 7/16 adapters. Made of

machined brass and Tri-Plated bodies. Gold plated contacts.

Kits are in zippered leather cases.

REQUEST QUOTE

Part

Number

Description

Fig.

No.

ADPT3PA

N to 7/16 Adapter Kit (Tri-

Plate)

102

P1-P3 P4-P4

132A505

Mfr. #:

Buy 132A505

Manufacturer:

Bomar Interconnect

Description:

RF Adapters - In Series ADAPTOR N JACK/JACK

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

132A505

132A505

Products related to this Datasheet