File Name:LCM-60U-SPEC 2016-11-23
50W Multiple-Stage Constant Current Mode LED Driver
LCM-60U series
LRN button description
LRN (Learn) Button:
Shortly press (around 2 second) the button to enter linking (pairing) / unlinking mode.
The LED lamp connected at the output of LCM starts toggling between 10% and 90% indicating that linking mode is active. Once activated, this
mode stays active to provide time to link or unlink multiple switches. The mode will stop and bak to normal mode after 30 seconds if no wireless
telegram from switch is received.
For the switch to be linked, click the”I” button (top button marked on the switch plastic or “I” symbol on the back of the switch 4 times quickly, In case
the output is continuous 100% 4 seconds, it mean the switch is linked successfully.
The LED driver is now ready to accept new links on another switch.
In case a linked switch to be unlinked, please use the same action as described from the linking method above.
To exit linking / unlinking mode and return to normal operation, wait 30 seconds without doing anything or shortly press the button again.
In order to clear all linked switches and reset the LED driver to factory settings, please press and hold the button for 10 seconds.
Installation & Pairing
Hareware connection:
1.Connect the LED lamp to the driver.
2.Connect the driver to the AC mains.
There are two approaches for linking(pairing):
1.Using the LRN button on the driver
The instruction is in the LRN button description.
2.Using the NAVIGAN wireless software
Benefit to use NAVIGAN is more dimming parameters can be configured .
The software can be download in the website link below.
http://www.navigan.com/
After the software installation, insert the NWC300 into one of USB port from the computer.
For more details, please check the manual.
※
The following is only for Optional EO model:
NWC300
