Step-Up (115VAC to 230VAC)
176 Series
Plug-In
Features
Single winding, does not provide isolation, for use where equipment is
already isolated and only voltage change is required.
World wide applications, 50 or 60 Hz. operation, step up (115VAC to
230VAC).
Input is circuit breaker protected.
Hi-pot tested to 2 KV RMS
Input is a standard 3-wire, grounded plug (can also be used
with adaptors for proper grounding).
Input is connected to a 5 foot cord & standard grounded North American
plug (NEMA 5-15P)
Output - Due to U.L changes in 2007 - NEW production with the European
(Shuko) parts would no longer be U.L. listed. Therefore, we replaced this
output receptacle with a one foot long "pig tail" cord with a standard North
American 3-wire, 250V receptacle (NEMA 6-15R) for any production after
the first part of 2008.
North American Mark of Safety - C UL & UL listed (File #E211544).
Indoor use only.
Remember - These units do NOT convert line frequency
Gallery
Quality Products. Service Excellence.
