OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DF14-2628SCFA(90)

P1-P3P4-P6P7-P8
User's Manual
R20UT2220EJ0200 Rev.2.00 Page 1 of 8
Mar 05, 2014
R0E5563NEDMB00
Debugging MCU Board for 144-pin 0.5mm-pitch LQFP
of the RX63N and RX631 Groups
1. Overview
The debugging MCU board R0E5563NEDMB00 (hereafter referred to as “this product”) is for MCUs of the RX63N
and RX631 groups in the PLQP0144KA-A package.
With the E20 emulator, the emulator occupies some user port pins for controlling the emulator and output of trace
information. These user port pins must be connected with a 38-pin connector installed on the user system.
With this product, however, all user port pins are available for the user system. In addition, you do not need to install a
38-pin connector on the user system.
Figure 1 shows the configuration of a system that includes this product and the E20.
Be sure to read section 7, Notes on Usage, before using this product.
Debugging MCU board
(this product)
YQPACK
(provided with this
product)
NQPACK
(provided with this product)
E20 emulator
User system
38-pin connector
Host computer
USB interface cable
Figure 1 System Configuration
2. Package Components
The package of this product consists of the following items. Check that you have all of the components when you
unpack the box.
Table 1 Package Components
Component
Quantity
Remarks
Debugging MCU board common part
(R0E5563NEVKZ00)
1
For the dimensions, refer to section 6, Dimensions of This Product.
Converter board (R0E55630EPFK00)
1
For the dimensions, refer to section 6, Dimensions of This Product.
YQPACK144SD
(from Tokyo Eletech Corporation)
1
Connector to be placed between this product and the NQPACK.
NQPACK144SD-ND
(from Tokyo Eletech Corporation)
1
IC socket for mounting on the user system
YQ-GUIDE-S1
(from Tokyo Eletech Corporation)
4
Screws for fastening the YQPACK to the NQPACK.
Cautions in handling
1
Cautions when handling the products of Tokyo Eletech Corporation
User’s Manual (English and Japanese)
1 for each
This manual (English)
Note: NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET,
CSPLUG/W, and LSPACK are trademarks of Tokyo Eletech Corporation.
R20UT2220EJ0200
Rev.2
.00
Mar 05, 2014
R0E5563NEDMB00 User's Manual
R20UT2220EJ0200 Rev.2.00 Page 2 of 8
Mar 05, 2014
Important
CAUTION
Caution to Be Taken for Disposal:
legislation.
European Union regulatory notices:
producers for the collection and recycling or disposal of electrical and electronic waste. Return of
WEEE under these regulations is applicable in the European Union only. This equipment
(including all accessories) is not intended for household use. After use the equipment cannot be
disposed of as household waste, and the WEEE must be treated, recycled and disposed of in an
environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life
equipment, register for this service at “
http://www.renesas.eu/weee”.
Cautions to Be Taken for Handling This Product:
•
• Protect this product from excessive physical shock.
• Do not alter this product. If any alteration is attempted, this product will no longer be supported.
• The MCU installed on this product is only for use in debugging. Do not remove the MCU from
the board to use it for other purposes.
• For purchasing the NQPACK144SD-ND, YQPACK144SD and HQPACK144SD, contact the
following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
Cautions to Be Taken for Turning On the Power:
•
Do not apply a power voltage that is beyond the range guaranteed for the MCU.
• Only supply power to this product and connected parts after having connected all cables.
Caution for Use Temperature:
This product is to be used in an environment with a maximum ambient temperature of 35°C.
Care should be taken that this temperature is not exceeded.
European Union regulatory notices
This product complies with the following EU Directive.
Environmental Compliance and Certification:
• Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EC
R0E5563NEDMB00 User's Manual
R20UT2220EJ0200 Rev.2.00 Page 3 of 8
Mar 05, 2014
3. Specifications
Table 2 shows the functional specifications of this product.
Table 2 Specifications of This Product
Item No.
Item
Specification
1
MCU for use
• RX63N- and RX631-group MCUs in PLQP0144KA-A packages
2
The MCU type name
installed on this product
• R5F563NEDDFC
(ROM: 2 Mbytes, RAM: 128 Kbytes, E2 Data Flash: 32 Kbytes )
3
Power supply
• Power (VCC = AVCC0 = VREFH = VCC_USB) at 2.7
*1
to 3.6 V is supplied
from the user system.
• Power (VREFH0) at 2.7 to AVCC0 is supplied from the user system.
• Power (VBATT) at 2.3 to 3.6 V is supplied from the user system.
• The state of power supply can be monitored through the test pins (TP1 for
VREFH0, TP2 for AVCC0, TP3 for VREFH, TP4 for VBATT, TP5 for
VCC_USB, TP6 for VCC, and TP7 for GND).
4
System clock (EXTAL)
• 4 to 16 MHz clock signals are supplied from the user system.
5
Sub clock (XCIN)
• 32.768 kHz clock signals are supplied from the user system.
Note*: 1. Use this product at a voltage (VCC > V
POR
) that doesn't make the MCU enter the state of power on reset.
4. Reset Circuit
Figure 2 shows the reset circuit, with the level on the RES# pin pulled up by a 510-kΩ resistor.
38-pin connector (CN3)
Pin 9 (RES#)
*1
MCU (IC1)
RES#
YQSOCKET144SDF (IC1)
Pin 19 (RES#)
*2
R9
0Ω
UVCC
R8
510kΩ
Notes*: 1. The number indicated is the pin number of the 38-pin connector (CN3).
2. The number indicated is the pin number of the YQSOCKET144SDF (IC1).
R0E5563NEVKZ00
R0E55630EPFK00
Figure 2 Reset Circuit
P1-P3P4-P6P7-P8

DF14-2628SCFA(90)

Mfr. #:
Buy DF14-2628SCFA(90)
Manufacturer:
Hirose Electric
Description:
Headers & Wire Housings SOCKET CONTACT/REEL AWG26-28
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet