Data Sheet AD8676
Rev. C | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 4.
Parameter Rating
Supply Voltage ±18 V
Input Voltage ±V supply
Differential Input Voltage ±0.7 V
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range
RM, R Packages −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range
RM, R Packages −65°C to +150°C
Lead Temperature Range (Soldering, 10 sec) 300°C
Table 5. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
8-Lead MSOP (RM) 210 45 °C/W
8-Lead SOIC_N (R) 158 43 °C/W
POWER SEQUENCING
The op amp supplies must be established simultaneously with,
or before, any input signals are applied. If this is not possible,
the input current must be limited to 10 mA.
ESD CAUTION
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.