AMPLIFIERS - LOW NOISE - SMT
7
7 - 7
HMC460LC5
v05.0217
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and package bottom should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Analog Devices,
upon request.
List of Materials for Evaluation PCB 117810
[1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 - J4 2 mm Molex Header
C4 100 pF Capacitor, 0402 Pkg.
C2, C3 1000 pF Capacitor, 0402 Pkg.
C1 4.7 µF Capacitor, Tantalum
C5 0.1 uF Capacitor, 0603 Pkg.
C6 0.01 uF Capacitor, 0603 Pkg.
C7 2.2 uF Capacitor, 0603 Pkg.
U1 HMC460LC5
PCB
[2]
117808 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
