IS-Dev Kit-2 Users Manual
7850 East Gelding Drive • Scottsdale, AZ 85260-3420
IS-Dev Kit-2 Users Manual A.doc
Page 3 of 15
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone 480.991.0942 • Fax 480.998.1435
www.nkkswitches.com • Email engineering@nkkswitches.com 0110
1. General Features
The IS-Dev Kit-2 Version 1.1 controls two LCD 36x24 SmartSwitches with resolution of 36x24 pixels. The
controller for the IS-Dev Kit-2 is the IS-S0203.
Below are current features:
•
Serial communication via RS232
•
Flash EEPROM for 255 images and attribute locations rated for 100,000 write cycle.
•
Audio feedback while switch is pressed.
•
Adjustable backlight brightness.
•
Controller board firmware can be customized based on customer requirements.
Switch-action report from the controller to the host:
•
Switch one closure is reported as 81H.
•
Switch two closure is reported as 82H.
•
Switch one release is reported as B1H.
•
Switch two release is reported as B2H.
•
Timer expire is reported as 83H.
Stand alone operation features:
•
The controller can be programmed one time with images and set-ups. Then the controller can go
through various menus as programmed via switch actions and timer expires.
Real-time operation features:
•
Download what image location data each LCD module should display.
•
Download characters and controller will create graphic data using 5x7 font for any switch.
•
Download characters and controller will create graphic data using 7x10 font for any switch.
•
Change backlight color on any LCD module.
