2
www.fairchildsemi.com
FODM3051, FODM3052, FODM3053 Rev. 1.0.0
FODM3051, FODM3052, FODM3053 4-Pin Full Pitch Mini-Flat Package Random Phase Triac Driver Output Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Electrical Characteristics
(T
A
= 25°C Unless otherwise specified)
Individual Component Characteristics
Transfer Characteristics
(T
A
= 25°C Unless otherwise specified)
Isolation Characteristics
(T
A
= 25°C Unless otherwise specified)
* All typicals at T
A
= 25°C
Note
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit. Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an I
F
value less than or equal to max I
FT
. Therefore, recommended operating I
F
lies
between max I
FT
(15 mA for FODM3051, 10 mA for FODM3052, 5 mA for FODM3053) and absolute max I
F
(60 mA).
Parameter Symbol Value Units
TOTAL PACKAGE
Storage Temperature T
STG
-40 to +125 °C
Junction Temperature T
J
125 °C
Operating Temperature T
OPR
-40 to +100 °C
EMITTER
Continuous Forward Current I
F (avg)
60 mA
Peak Forward Current (1 µs pulse, 300 pps.) I
F (pk)
1A
Reverse Input Voltage V
R
3V
Power Dissipation
(No derating required over operating temp. range)
P
D
100 mW
DETECTOR
On-State RMS Current I
T(RMS)
70 mA (RMS)
Off-State Output Terminal Voltage V
DRM
600 V
Power Dissipation
(No derating required over operating temp. range)
P
D
250 mW
Parameter Test Conditions Symbol Device Min Typ* Max Unit
EMITTER
Input Forward Voltage I
F
= 10 mA V
F
All 1.20 1.5 V
Reverse Leakage Current V
R
= 3 V I
R
All 0.01 100 µA
DETECTOR
Peak Blocking Current Either Direction V
DRM
= 600V, I
F
= 0 (note 1) I
DRM
All 3 100 nA
Peak On-State Voltage Either Direction I
TM
= 100mA peak V
TM
All 2.0 2.5 V
Critical Rate of Rise of Off-State Voltage I
F
= 0 (Figure 8, note 2) dV/dt All 1000 V/µs
DC Characteristics Test Conditions Symbol Device Min Typ* Max Unit
LED Trigger Current Main Terminal
Voltage = 3V (note 3)
I
FT
FODM3051 15 mA
FODM3052 10
FODM3053 5
Holding Current, Either Direction I
H
All 300 µA
Characteristic Test Conditions Symbol Device Min Typ* Max Unit
Steady State Isolation Voltage t = 1 Minute V
ISO
All 3750 V(RMS)