https://www.phoenixcontact.com/pi/products/1430417
08/21/2018Page2/4
Bus system connector-SACC-M12MRB-5CON-PG 9-SH-1430417
Technical data
General
48 V AC
Number of positions 5
Insulation resistance ≥ 100 MΩ
Coding B-coded
Standards/regulations M12 connector IEC61076-2-101
Signal type/category PROFIBUS
INTERBUS
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Screw connection
Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.75 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Conductor cross section AWG 24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure nut with coupling sleeve)
Tightening torque Screw plug insert with sleeve housing as far it will go
Assembly instructions The connector pin assignment can be rotated 90° to the cable outlet
The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 HB
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material of grip body Zinc die-cast, nickel-plated
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR
Cable
Standards/specifications M12 connector IEC61076-2-101
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Connection in acc. with standard CUL
Flammability rating according to UL 94 HB
Environmental Product Compliance
