2750950

https://www.phoenixcontact.com/us/products/2750950

09/08/2014Page1/4

I/O module-IB ST ZF 24 PT100 4/4-2750950

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

INTERBUS-ST analog input module, 4 inputs, RTD, 2, 3 and 4-wire connection, IP20 protection, consisting of:

Terminal part with spring-cage connection and module electronics

The illustration shows version IB ST

- A new shielding concept for sensors makes it possible to meet more severe EMC requirements. For each input, there is a separate shield connection.

External circuit elements are not necessary.

- Diagnostic LEDs provide information on the operating status at any time.

- All modules can be individually labeled on the large pull-out labeling field. The insert cards can be prepared by hand, or by plotter or printer.

- In the event of failure or malfunction, the electronics of the module can be easily replaced. The passive termination block remains mounted on the rail.

This means that the replacement process can be carried out in a just a few seconds and without the need for tools.

- The fuses are accessible from outside, so that a fault can be cleared quickly.

- The connection to protective earth ground is made directly via the DIN rail.

- The conventional labeling materials (Zack strip ZB-6, etc.) can be used to label the termination blocks. 

Product Features

Weight per Piece (excluding packing) 576.0 GRM

Custom tariff number 85389091

Country of origin Germany

Technical data

Note

https://www.phoenixcontact.com/us/products/2750950

09/08/2014Page2/4

I/O module-IB ST ZF 24 PT100 4/4-2750950

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

Degree of protection IP20

Interfaces

Interface ST local bus

Connection method ST local bus connector

Transmission speed 500 kBit/s

Power supply

Communications power U

L

9 V DC (from the ST local bus)

I/O voltage 24 V DC

Electrical isolation

Test section Bus/Inputs 500 V AC 50 Hz 1 min

Supply voltage/inputs 500 V AC 50 Hz 1 min

Supply voltage/Ground conductor 500 V AC 50 Hz 1 min

I/O voltage/Ground conductor 500 V AC 50 Hz 1 min

Inputs

Number of inputs 4

Connection method 2, 3, 4-wire

Sensor types (RTD) that can be used PT: -200 °C ... +850 °C, Ni: -60 °C ... +250 °C

Measuring principle Sigma/Delta process

https://www.phoenixcontact.com/us/products/2750950

09/08/2014Page3/4

I/O module-IB ST ZF 24 PT100 4/4-2750950

Technical data

General

Weight 540 g

Mounting type DIN rail

Connection method Spring-cage connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section stranded min. 0.2 mm²

Conductor cross section stranded max. 1.5 mm²

Conductor cross section AWG/kcmil min. 24

Conductor cross section AWG/kcmil max 16

Connection method 2, 3, 4-wire

eCl@ss 6.0 27242601

eCl@ss 7.0 27242601

eCl@ss 8.0 27242601

ETIM

ETIM 2.0 EC001431

ETIM 3.0 EC001596

ETIM 4.0 EC001596

ETIM 5.0 EC001596

UNSPSC

UNSPSC 6.01 43172015