Step-by-Step Installation Instructions
STEP
3
TOWER SYSTEM Quick Start Guide for TWR-MCF51CN
In this Quick Start Guide, you will learn how to set up the TWR-MCF51CN
module and run the default accelerometer demonstration.
Install software
and tools
•InstallCodeWarrior™Development
Studio for Microcontrollers v6.2
(Professional Edition - 30 day license)*
•InstallProcessorExpertUpdatev3.06
•InstallCodeWarriorPatchv6.2.2
•InstallFreescaleMQX™RTOSv3.2
Install in the order listed. These programs are
included on the DVD. For updates, please visit
www.freescale.com/tower
*A Basic, Standard, or Professional version of
CodeWarrior is required to run the MQX Lab
Tutorials. CodeWarrior Professional 30-day
evaluation is included on DVD.
Connect the USB cable
Connect one end of the USB
cable to the PC and the other end to the
mini-B connector on the TWR-MCF51CN
module. Allow the PC to automatically
configure the USB drivers if needed.
Tilt the board
Watch LED1, LED2 and LED3
light up as the TWR-MCF51CN module is
tilted back and forth. Press SW2 or SW3
to see LED4 light up.
Explore further by
conducting Lab 1:
Security Monitor with Telnet
To run a telnet demonstration using the
TWR-MCF51CN, follow the instructions in
Lab 1: Security Monitor with Telnet.
The lab is located in the TWR-MCF51CN-KIT Lab
Tutorial document, located under the Training tab
on the DVD.
continued on back...
STEP
1
STEP
2
STEP
4
