SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
Note.2
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
RIPPLE & NOISE (max.)
Note.3
OUTPUT
VOLTAGE RANGE
Note.7
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
ENVIRONMENT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT(max.)
SAFETY STANDARDS
SAFETY &
EMC
(Note. 9)
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
PROTECTION
GSM160B15-R7BGSM160B12-R7B GSM160B20-R7B GSM160B24-R7B GSM160B48-R7B
15V12V
GSM160B15GSM160B12
20V
GSM160B20
24V
GSM160B24
48V
GSM160B48
100mVp-p80mVp-p 120mVp-p 120mVp-p 150mVp-p
VOLTAGE TOLERANCE
Note.4
LINE REGULATION
Note.5
LOAD REGULATION
±
5.0%
±
4.0%
±
3.0%
±
3%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
5.0%
±
5.0%
±
4.0%
±
3.0%
±
3%
80 ~ 264VAC 113 ~ 370VDC
47 ~ 63Hz
91%
90%
92 5%
.
93 5%
.
94%
1.85A / 115VAC 1A / 230VAC
55A / 115VAC 110A / 230VAC
Cold start
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P: 4KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
℃
239.1K hrs min. MIL-HDBK-217F(25 )
℃
-30 ~ +70 (Refer to "Derating Curve")
℃
20% ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH non-condensing
℃
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
175*72*35mm (L*W*H)
0.66Kg; 20pcs/14.2Kg/1.06CUFT
CONNECTOR
PLUG
CABLE
See page ; Other type available by customer requested
4~5
See page ; Other type available by customer requested
4~5
OVERLOAD
OVER VOLTAGE
105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
9.6A11.5A 8A 6.67A 3.34A
0 ~ 9.6A0 ~ 11.5A 0 ~ 8A 0 ~ 6.67A
0 ~ 3.34A
144W138W 160W 160W 160W
Protection type : Shut down o/p voltage, re-power on to recover
SETUP, RISE TIME
Note.6
HOLD UP TIME (Typ.)
2000ms, 50ms / 230VAC 2500ms, 50ms / 115VAC at full load
24ms / 230VAC 24ms / 115VAC at full load
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover
Touch current < 100 A/264VAC
±5.0%
±
0.03% / (0 ~ 40 )
℃℃
ISOLATION LEVEL
Primary-Secondary: 2xMOPP
1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. ℃
2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 f & 47 f capacitor.
4. Tolerance: includes set up tolerance, line regulation, load regulation.
5. Line regulation is measured from low line to high line at rated load.
. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.6
. Derating may be needed under low input voltage. Please check the derating curve for more details.7
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
9. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
12V/15V:PF>0.93 / 230VAC 20V,24V,48V: PF>0.98 / 115VAC at full loadPF>0.94 / 230VAC
GSM160B series
160W AC-DC le MedicalAdaptorReliab Green
OPERATING ALTITUDE Note.8
Parameter
Parameter
ESD
Standard
Standard
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level / Note
Test Level / Note
Class B
Class B
Class A
-----
EMC IMMUNITY
EMC EMISSION
EN55024 , EN60601-1-2, EN61204-3
Level 4, 15KV air ; Level 4, 8KV contact
100% dip 1 periods, 30% dip 25 periods,
100% interruptions 250 periods
Level 3, 1KV/Line-Line
Level 4, 30A/m
Level 3, 10V
Level 3, 2KV
IEC60601-1, EN60601-1 EN , ANSI/AAMI ES60601-1 (3.1 version),/ 60601-1-11 / ES60601-1-11
CAN/CSA-C22.2 No. 60601-1:14 - Edition 3 approved
, EAC TP TC 004
μ
3000 meters
μ
RF field susceptibility
EFT bursts
Surge susceptibility
Conducted susceptibility
Magnetic field immunity
Voltage dip, interruption
Conducted emission
Radiated emission
Harmonic current
Voltage flicker
File Name:GSM160B-SPEC 2018-01-12
Level 3, 10V/m( 80MHz~2.7GHz )
Table 9, 9~28V/m( 385MHz~5.78GHz )
EN55011 (CISPR11), FCC PART 15 / CISPR22,
CAN ICES-3(B)/NMB-3(B)
EN55011 (CISPR11), FCC PART 15 / CISPR22,
CAN ICES-3(B)/NMB-3(B)