ADM231L–ADM234L/ADM236L–ADM241L
Rev. C | Page 4 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
CC
–0.3 V to +6 V
V+ (V
CC
– 0.3 V) to +14 V
V– +0.3 V to −14 V
Input Voltages
T
IN
–0.3 V to (V
CC
+ 0.3 V)
R
IN
±30 V
Output Voltages
T
OUT
(V+, +0.3 V) to (V–, –0.3 V)
R
OUT
–0.3 V to (V
CC
+ 0.3 V)
Short-Circuit Duration
T
OUT
Continuous
Power Dissipation
N-14 PDIP (Derate 10 mW/°C
above 70°C)
800 mW
N-16 PDIP (Derate 10.5 mW/°C
above 70°C)
840 mW
N-20 PDIP (Derate 11 mW/°C
above 70°C)
890 mW
N-24-1 PDIP (Derate
13.5 mW/°C above 70°C)
1000 mW
R-16 SOIC (Derate 9 mW/°C
above 70°C)
760 mW
R-24 SOIC (Derate 12 mW/°C
above 70°C)
850 mW
R-28 SOIC (Derate 12.5 mW/°C
above 70°C)
900 mW
RS-28 SSOP (Derate 10 mW/°C
above 70°C)
900 mW
Parameter Rating
Q-14 CERDIP (Derate 10 mW/°C
above 70°C)
720 mW
Q-16 CERDIP (Derate 10 mW/°C
above 70•C)
800 mW
Q-24 CERDIP (Derate
12.5 mW/°C above 70°C)
1000 mW
Thermal Impedance, θ
JA
N-14 PDIP 140°C/W
N-16 PDIP 135°C/W
N-20 PDIP 125°C/W
N-24-1 PDIP 120°C/W
R-16 SOIC 105°C/W
R-24 SOIC 85°C/W
R-28 SOIC 80°C/W
RS-28 SSOP 100°C/W
Q-14 CERDIP 105°C/W
Q-16 CERDIP 100°C/W
Q-24 CERDIP 55°C/W
Operating Temperature Range
Commercial (J Version) 0°C to 70°C
Industrial (A Version) −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Lead Temperature, Soldering 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220° C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods of
time may affect device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.