TNPU e3
www.vishay.com
Vishay Draloric
Revision: 01-Jul-16
1
Document Number: 28779
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ultra Precision Thin Film Chip Resistors
TNPU e3 ultra precision thin film flat chip resistors combine
the proven reliability of TNPW e3 products with a most
advanced level of precision and stability. This unique
combination makes the product perfectly suited for all
applications with outstanding requirements towards size,
reliable precision and stability.
FEATURES
• Low temperature coefficient and tight
tolerances
• Sulfur resistance verified according to ASTM
B 809
• Superior moisture resistivity (85 °C; 85 % RH)
• Excellent overall stability at different environmental
conditions 0.05 % (1000 h rated power at 70 °C)
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Industrial equipment
• Telecommunication
• Medical equipment
• Instrumentation
• Test and measuring equipment
• Automotive
Note
(1)
Please refer to APPLICATION INFORMATION, see below.
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
TECHNICAL SPECIFICATIONS
DESCRIPTION TNPU0603 e3 TNPU0805 e3 TNPU1206 e3
Imperial size 0603 0805 1206
Metric size code RR1608M RR2012M RR3216M
Resistance range 100 to 100 k 100 to 332 k 100 to 511 k
Resistance tolerance ± 0.1 %; ± 0.05 %; ± 0.02 %
Temperature coefficient ± 10 ppm/K; ± 5 ppm/K
Rated dissipation, P
70
(1)
0.1 W 0.125 W 0.25 W
Operating voltage, U
max.
AC
RMS
/DC 75 V 150 V 200 V
Permissible film temperature,
F max.
(1)
125 °C 125 °C 125 °C
Operating temperature range -55 °C to 125 °C -55 °C to 125 °C -55 °C to 125 °C
Permissible voltage against ambient
(insulation):
1 min; U
ins
100 V 200 V 300 V
FIT
observed
0.1 x 10
-9
/h 0.1 x 10
-9
/h 0.1 x 10
-9
/h
