SSM2141
REV.
–3–
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Input Voltage
1
. . . . . . . . . . . . . . . . . . . . . . . . Supply Voltage
Output Short-Circuit Duration . . . . . . . . . . . . . . Continuous
Storage Temperature Range
P Package . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . +300°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Typical Performance Characteristics
Small Signal Transient Response
Common-Mode Rejection vs. Frequency
Total Harmonic Distortion vs. Frequency
Large Signal Transient Response
Power Supply Rejection vs. Frequency
Dynamic Intermodulation Distortion vs. Frequency
Package Type u
JA
2
u
JC
Units
8-Pin Plastic DIP (P) 103 43 °C/W
NOTES
1
For supply voltages less than ±18 V, the absolute maximum input voltage is equal
to the supply voltage.
2
θ
JA
is specified for worst case mounting conditions, i.e., θ
JA
is specified for device
in socket for P-DIP package.
