MAX5070/MAX5071
High-Performance, Single-Ended, Current-Mode
PWM Controllers
_______________________________________________________________________________________ 9
Typical Operating Characteristics (continued)
(V
CC
= 15V, T
A
= +25°C, unless otherwise noted.)
Pin Descriptions
PIN NAME FUNCTION
1 COMP Error-Amplifier Output. COMP can be used for soft-start.
2 FB Error-Amplifier Inverting Input
3CS
Input to the PWM Comparator and Overcurrent Protection Comparator. The current-sense signal is
compared to a signal proportional to the error-amplifier output voltage.
4R
T
/C
T
Timing Resistor and Capacitor Connection. A resistor R
T
from R
T
/C
T
to VREF and capacitor C
T
from
R
T
/C
T
to GND set the oscillator frequency.
5 GND
Power-Supply Ground. Place the V
CC
and VREF bypass capacitors close to the IC to minimize
ground loops.
6 OUT MOSFET Driver Output. OUT connects to the gate of the external n-channel MOSFET.
7V
CC
Power-Supply Input for MAX5070. Bypass V
CC
to GND with a 0.1µF ceramic capacitor or a parallel
combination of a 0.1µF and a higher value ceramic capacitor.
8 VREF
5V Reference Output. Bypass VREF to GND with a 0.1µF ceramic capacitor or a parallel combination
of a 0.1µF and a higher value ceramic capacitor.