2.6 Ammo pack dimensions
3 Lead configuration
Straight leads are standard for disk varistors. Other lead configurations as crimp style or cus-
tomer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads
(non-standard) are differently crimped for technical reasons; the individual crimp styles are denot-
ed by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below.
The crimp styles of the individual types can be seen from the type designation in the ordering ta-
bles.
3.1 Crimp style mode
Example: B72210S0271K
5
01
|
Digit 13
Digit 13 of ordering code Crimp style Figure
1 Standard, straight leads 1
2 S2 2
3 S3 3
5 S5 4
Available upon request
Internal coding 5
Leaded varistors B722*
Automotive series for 42 V
Page 13 of 20Please read Cautions and warnings and
Important notes at the end of this document.
