Table 14: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
209 – – – Alignment of logical blocks within a larger physical block
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–0 F 00000000000000b Logical sector offset within the first physical sector where the
first logical sector is placed
210–211 – V 0000h 0000h Write-read-verify sector count mode 3
212–213 – F 0000h 0001h Write-read-verify sector count mode 2
214–216 – X 0000h 0000h 0000h Obsolete
217 – F 0001h Nominal media rotation rate (non-rotating media)
218 – – 0000h Reserved
219 – X 0000h Obsolete
220 15–8 F 00h Reserved
7–0 V 00h Write-read-verify feature set current mode
221 – – 0000h Reserved
222 – – – Transport major revision number. 0000h or FFFFh = Device does
not report version
15–12 F 0001b Transport type: 0h = Parallel, 1h = Serial, Eh = PCIe, All others =
Reserved
11–8 – 0000b Reserved
7 F 1b 1 = SATA rev 3.2 is supported
6 F 1b 1 = SATA rev 3.1 is supported
5 F 1b 1 = SATA rev 3.0 is supported
4 F 1b 1 = SATA rev 2.6 is supported
3 F 1b 1 = SATA rev 2.5 is supported
2 F 1b 1 = SATA II: Extensions are supported
1 F 1b 1 = SATA rev 1.0a is supported
0 F 1b 1 = ATA8-AST is supported
223 – F 0000h Transport minor revision number
224–229 – F 0000h 0000h 0000h
0000h 0000h 0000h
Reserved
230–233 – – 0000h 0000h 0000h
0000h
Extended number of user-addressable sectors
234 – F 0001h Minimum number of 512-byte units per DOWNLOAD MICRO-
CODE command for mode 3
235 – F 00FFh Maximum number of 512-byte units per DOWNLOAD MICRO-
CODE command for mode 3
236–242 – – 0000h 0000h 0000h
0000h 0000h 0000h
0000h
Reserved
5100 Series NAND Flash SSD
Device ID
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
23
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.