OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CW01030K00JE12

P1-P3
CW
www.vishay.com
Vishay Dale
Revision: 01-Feb-12
1
Document Number: 30215
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound Resistors, Commercial Power,
Silicone Coated, Axial Lead
FEATURES
• High performance for low cost
• High temperature silicone coating
• Complete welded construction
• Excellent stability in operation
• High power to size ratio
• Compliant to RoHS Directive 2002/95/EC
Notes
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Notes
(1)
Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements
(2)
3 % tolerance available
(3)
Higher values available on request
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
(1)
P
25 °C
W
CHARACTERISTIC U + 250
°C
POWER RATING
(1)
P
25 °C
W
CHARACTERISTIC V + 350
°C
RESISTANCE RANGE
TOLERANCE
± %
(2)
WEIGHT
(max.) g
CW1/2 CW-1/2 0.5 - 0.1 to 1.77K 5, 10 0.21
CW001 CW-1 1.0 - 0.1 to 6.37K 5, 10 0.34
CW01M CW-1M 1.0 - 0.1 to 3.3K 5, 10 0.3
CW002 CW-2 4.0 5.5 0.1 to 28.7K 5, 10 2.1
CW02M CW-2M 3.0 3.75 0.1 to 12K 5, 10 0.65
CW02B CW-2B 3.0 3.75 0.1 to 15K 5, 10 0.7
CW02B...13 CW-2B-13 4.0 6.0 0.1 to 10.89K
(3)
5, 10 0.9
CW02C CW-2C 2.5 3.25 0.1 to 19.9K 5, 10 1.8
CW02C...14 CW-2C-14 2.5 3.25 0.1 to 19.9K 5, 10 1.2
CW005 CW-5 5.0 6.5 0.1 to 58.5K 5, 10 4.2
CW005...2 CW-5-2 4.0 5.0 0.1 to 40.3K 5, 10 4.2
CW005...3 CW-5-3 5.0 6.5 0.1 to 58.5K 5, 10 4.2
CW007 CW-7 7.0 9.0 0.1 to 95.2K 5, 10 4.7
CW010 CW-10 10.0 13.0 0.1 to 167K 5, 10 9.0
CW010...3 CW-10-3 10.0 13.0 0.1 to 167K 5, 10 9.0
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CW RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 30 for 10 and above, ± 50 for 1.0 to 9.9 , ± 90 for 0.5 to 0.99
Dielectric Withstanding Voltage V
AC
1000
Short Time Overload -
5 x rated power for 5 s for 3.75 W size and smaller, 10 x rated power for 5 s for 4 W size and greater
Terminal Strength lb 10 minimum
Maximum Working Voltage V (P x R)
1/2
Operating Temperature Range °C Characteristic U = - 65 to + 250, characteristic V = - 65 to + 350
Power Rating -
Characteristic U = + 250 °C max. hot spot temperature, ± 0.5 % max. R in 2000 h load life
Characteristic V = + 350 °C max. hot spot temperature, ± 3.0 % max. R in 2000 h load life
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CW02C10K00JB1214
GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL
(See Standard
Electrical
Specifications
Global Model
column for
options)
R = Decimal
K = Thousand
1R500 = 1.5
1K500 = 1.5 k
H = ± 3.0 %
J = ± 5.0 %
K = ± 10.0 %
E70 = Lead (Pb)-free, tape/reel, 1K pcs (smaller than CW005)
E73 = Lead (Pb)-free, tape/reel, 500 pcs
E12 = Lead (Pb)-free, bulk
D18 = Lead (Pb)-free, R1R80 tape/reel
CW02B...13 pack code for Europe use only
S70 = Tin/lead, tape/reel, 1K pcs (smaller than CW005)
S73 = Tin/lead, tape/reel, 500 pcs
B12 = Tin/lead, bulk
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
Historical Part Numbering example: CW-2C-14 10 k 5 % B12
CW-2C-14 10 k 5 % B12
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING
2C10 00JKW0 B12C 41
CW
www.vishay.com
Vishay Dale
Revision: 01-Feb-12
2
Document Number: 30215
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches (millimeters)
Notes
(1)
On some standard reel pack methods, the leads may be trimmed to a shorter length than shown
(2)
B (maximum) dimension is clean lead to clean lead
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: Ceramic: Steatite or alumina, depending on physical
size
Coating: Special high temperature silicone
Standard Terminals: Tinned Copperweld
®
(CW02B…13 is tinned copper)
End Caps: Stainless steel
Part Marking: DALE, model, wattage
(3)
, value, tolerance,
date code
Note
(3)
Wattage marked on resistor will be “V” characteristic, CW1/2 will
not be marked with wattage
DERATING
Note
(4)
All R figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of + 350 °C.
R maximum figures are considerably lower when tested at a maximum operating temperature of + 250 °C.
MODEL
DIMENSIONS in inches [millimeters]
AB [MAXIMUM]
(2)
CD
CW1/2 0.250 ± 0.031 [6.35 ± 0.787] 0.281 [7.14] 0.085 ± 0.020 [2.16 ± 0.508] 0.020 ± 0.002 [0.508 ± 0.051]
CW001 0.406 ± 0.031 [10.31 ± 0.787] 0.437 [11.10] 0.094 ± 0.031 [2.39 ± 0.787] 0.020 ± 0.002 [0.508 ± 0.051]
CW01M 0.285 ± 0.025 [7.24 ± 0.635] 0.311 [7.90] 0.110 ± 0.015 [2.79 ± 0.381] 0.020 ± 0.002 [0.508 ± 0.051]
CW002 0.625 ± 0.062 [15.87 ± 1.57] 0.765 [19.43] 0.250 ± 0.032 [6.35 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051]
CW02M 0.500 ± 0.062 [12.70 ± 1.57] 0.562 [14.27] 0.185 ± 0.015 [4.70 ± 0.381] 0.032 ± 0.002 [0.813 ± 0.051]
CW02B 0.562 ± 0.062 [14.27 ± 1.57] 0.622 [15.80] 0.188 ± 0.032 [4.78 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
CW02B...13 0.500 ± 0.062 [12.70 ± 1.57] 0.563 [14.30] 0.188 ± 0.032 [4.78 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
CW02C 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.032 [5.54 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051]
CW02C...14 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.032 [5.54 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
CW005 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.312 ± 0.032 [7.92 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051]
CW005...2 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.250 ± 0.032 [6.35 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
CW005...3 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.312 ± 0.032 [7.92 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
CW007 1.218 ± 0.062 [30.94 ± 1.57] 1.281 [32.54] 0.312 ± 0.032 [7.92 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051]
CW010 1.781 ± 0.062 [45.24 ± 1.57] 1.875 [47.62] 0.375 ± 0.032 [9.52 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051]
CW010...3 1.781 ± 0.062 [45.24 ± 1.57] 1.875 [47.62] 0.375 ± 0.032 [9.52 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051]
D
C
1.50 [38.10]
(1)
min.
A
B
RATED POWER IN %
AMBIENT TEMPERATURE IN °C
25
0
20
40
60
80
100
120
- 65
150 35050 2500- 50
CHAR. U
CHAR. V
PERFORMANCE
TEST CONDITIONS OF TEST
TEST LIMITS
(4)
(CHARACTERISTIC V)
Thermal Shock Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C ± (2.0 % + 0.05 ) R
Short Time Overload 5 x rated power (3.75 W and smaller), 10 x rated power (4 W and larger) for 5 s ± (2.0 % + 0.05 ) R
Dielectric Withstanding
Voltage
1000 V
rms
, 1 min ± (0.1 % + 0.05 ) R
Low Temperature Storage - 65 °C for 24 h ± (2.0 % + 0.05 ) R
High Temperature Exposure 250 h at + 350 °C ± (4.0 % + 0.05 ) R
Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (2.0 % + 0.05 ) R
Shock, Specified Pulse MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks ± (0.2 % + 0.05 ) R
Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.2 % + 0.05 ) R
Load Life 2000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (3.0 % + 0.05 ) R
Terminal Strength 5 s to 10 s 10 pound pull test; torsion test - 3 alternating directions, 360° each ± (1.0 % + 0.05 ) R
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 02-Oct-12
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
P1-P3

CW01030K00JE12

Mfr. #:
Buy CW01030K00JE12
Manufacturer:
Vishay / Dale
Description:
Wirewound Resistors - Through Hole 10watts 30Kohms 5%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet