Bosch Sensortec
BMA120
Digital, triaxal acceleration sensor
Bosch Sensortec
Application Board
Application Board BT
© Bosch Sensortec GmbH reserves all rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on
to third parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany.
Specification and deliverables subject to change without notice BST-DHW-FL005-00 / Version_1.0_032009
Headquarters
Bosch Sensortec GmbH
Gerhard-Kindler-Strasse 8
72770 Reutlingen · Germany
Telephone +49 7121 3535 900
Fax +49 7121 3535 909
contact@bosch-sensortec.com
www.bosch-sensortec.com
Description
The Bosch Sensortec Application Board is a versatile,
universal demonstration and development environ-
ment for Bosch Sensortec sensor products. Based
on a powerful ARM7 µController the Application
Board can be used to configure all sensor parame-
ters by means of PC-based software. Sensor data
can be read-out, displayed and captured on the
attached PC.
The Application Board applies a flexible, universal
shuttle-board concept: Bosch Sensortec sensors
are available mounted on sensor specific shuttle-
boards. All sensor shuttle boards have identical
footprint and can be plugged into the Application
Board’s shuttle-board socket. The PC software
autonomously detects the sensor that has been
plugged-in and starts the corresponding software
application.
Windows 2000, Windows XP and Windows Vista are registered trade-
marks of Microsoft Corporation in the United States and/or other
countries.
Note: Product photo may differ from real product’s appearance.
Key features
Shuttle board interface to Bosch Sensortec f
sensor shuttle boards
USB 2.0 full spee d interface f
RS 232 interface (solder pads) f
Flexible power supply (USB bus powered and f
battery with charger logic)
4 push buttons f
Firmware can be upgraded via µSD card f
Multiple test points and connectors to access f
data from the board
Bluetooth interface (Application Board BT only) f
Deliverables
Application Board or Application Board BT f
hardware
USB cable f
CD with PC software “Application Desktop” f
(Software requires Windows 2000®, Windows XP® or Windows
Vista® operating system)
D f ocumentation
Note: Sensor shuttle boards must be ordered f
separately
