Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
1 2 3 4 5 6 7 8 9 11 12
E C P U 1 C 5A
Product code Dielectric &
construction
SuffixRated voltage Capacitance Suffix
Code
5
Tape width
8 mm
Cap. Tol.
1C 16 V.DC
10
M
Element
(Stacked)
Outer
electrode
L±0.2
W±0.20
H±0.2
e±0.30
(±0.25)
e±0.30
(±0.25)
g
✽
✽
✽ To be applied only for size code J1
●
Low ESR
●
Max. capacitance values 1.0 F
●
Smallest package size in fi lm capacitors 3225/1.0 F
●
For refl ow soldering
●
RoHS directive compliant
●
Noise suppressor
●
Coupling
Stacked dielectric and inner electrode with simple
mold - less construction
Features
Stacked Metallized Plastic
Film Chip Capacitor
Type : ECPU(A)
Category temp. range
(Including temperature-rise on unit surface)
– 40 °C to +85 °C
Rated voltage 16 V.DC
Capacitance range 0.10 µF to 1.0 µF (E6)
Capacitance tolerance ±20 %(M)
Dissipation factor (tan d) tan
d
<
1.5 % ( 20 °C, 1 kHz )
Withstand voltage Between terminals : Rated volt (V.DC)×150 %, 60 s
Insulation resistance (IR)
C
<
0.33 F : IR
>
1000 MΩ (20 °C, 10 V.DC, 60 s)
C > 0.33 F : IR
>
300 MΩ µF (20 °C, 10 V.DC, 60 s)
Soldering conditions
Refl ow soldering : 240 °C max. and 30 sec max. at more than 220 °C
(Temp. at capacitor surface)
✽
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Size
code
LWHe g
J1 2.0 1.25 1.0
0.45
>
0.6
H1 3.2 1.6 0.8
0.65
>
1.0
H2 3.2 1.6 1.0
0.65
>
1.0
H3 3.2 1.6 1.4
0.65
>
1.0
G2 3.2 2.5 1.4
0.65
>
1.0
Unit : mm
Construction Dimensions
Recommended applications
Explanation of part number
Speci cations
Feb. 201601
