OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ICS554G-01AI

P1-P3P4-P6P7-P7
ICS554-01A
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT PECL BUFFER
IDT™ / ICS™
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT 4
ICS554-01A REV C 092309
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS554-01A. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at
these or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended Operation Conditions
Item Rating
Supply Voltage, VDD 7 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Ambient Operating Temperature -40 to +85 ° C
Storage Temperature -65 to +150° C
Junction Temperature 125° C
Soldering Temperature 260° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature -40 – +85 ° C
Power Supply Voltage (measured in respect to GND) +3.15 +5.25 V
ICS554-01A
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT PECL BUFFER
IDT™ / ICS™
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT 5
ICS554-01A REV C 092309
DC Electrical Characteristics
VDD=3.3 V ±5% Ambient temperature -40 to +85 ° C
Note 1: V
OH
and V
OL
can be set by the external resistor values on the PECL outputs.
note 2: IDD includes the current through the external resistors which can be modified.
AC Electrical Characteristics
VDD = 3.3 V ±5, Ambient Temperature -40 to +85 ° C
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.15 5.25 V
Peak to Peak Input Voltage IN 0.3 1.0 V
Input Common Mode Range IN VDD=3.3 V VDD-2 VDD-0.6
Input Common Mode Range IN VDD=5 V VDD-3.7 VDD-0.6
Output High Voltage V
OH
Note 1 VDD-1.2 V
Output Low Voltage V
OL
Note 1 VDD - 2.0 V
Operating Supply Current IDD No Load, 135 MHz 80 mA
Short Circuit Current, 3.3 V I
OS
±50 mA
Short Circuit Current, 5 V I
OS
±60 mA
Parameter Symbol Conditions Min. Typ. Max. Units
Input Frequency 0 200 MHz
Propagation Delay VDD = 3.3 V 2 ns
VDD = 5 V 2 ns
Output to Output Skew Crosspoint of pair 0 50 ps
Duty Cycle Crosspoint of pair 45 50 55 %
ICS554-01A
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT PECL BUFFER
IDT™ / ICS™
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT 6
ICS554-01A REV C 092309
Package Outline and Package Dimensions (16-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch)
Package dimensions are kept current with JEDEC Publication No. 95
Ordering Information
*NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
554G-01AI*
554G01AI
Tubes 16-pin TSSOP -40 to +85 ° C
554G-01AIT* Tape and Reel 16-pin TSSOP -40 to +85 ° C
554G-01AILF
554G1AIL
Tubes 16-pin TSSOP -40 to +85 ° C
554G-01AILFT Tape and Reel 16-pin TSSOP -40 to +85 ° C
INDEX
AREA
1 2
16
D
E1
E
SEATING
PLANE
A
1
A
A
2
e
- C -
b
aaa C
c
L
Millimeters Inches
Symbol Min Max Min Max
A--1.20--0.047
A1 0.05 0.15 0.002 0.006
A2 0.80 1.05 0.032 0.041
b 0.19 0.30 0.007 0.012
C 0.09 0.20 0.0035 0.008
D 4.90 5.1 0.193 0.201
E 6.40 BASIC 0.252 BASIC
E1 4.30 4.50 0.169 0.177
e 0.65 Basic 0.0256 Basic
L 0.45 0.75 0.018 0.030
α 0° 8° 0° 8°
aaa -- 0.10 -- 0.004
P1-P3P4-P6P7-P7

ICS554G-01AI

Mfr. #:
Buy ICS554G-01AI
Manufacturer:
Description:
IC CLK BUFFER 1:4 200MHZ 16TSSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet