SD101AW, SD101BW, SD101CW
www.vishay.com
Vishay Semiconductors
Rev. 1.9, 23-Feb-18
1
Document Number: 85679
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Schottky Diodes
DESIGN SUPPORT TOOLS
MECHANICAL DATA
Case: SOD-123
Weight: approx. 10.3 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
FEATRUES
• For general purpose applications
• The low forward voltage drop and fast
switching make it ideal for protection of MOS
devices, steering, biasing and coupling diodes
for fast switching and low logic level
applications
• The SD101 series is a metal-on-silicon
Schottky barrier device which is protected by a
PN junction guardring
• AEC-Q101 qualified available
• Base P/N-E3 - RoHS-compliant, commercial grade
• Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1)
Valid provided that electrodes are kept at ambient temperature
Note
(1)
Valid provided that electrodes are kept at ambient temperature
click logo to get started
PARTS TABLE
PART ORDERING CODE
CIRCUIT
CONFIGURATION
TYPE MARKING REMARKS
SD101AW
SD101AW-E3-08 or SD101AW-E3-18
Single SA
Tape and reel
SD101AW-HE3-08 or SD101AW-HE3-18
SD101BW
SD101BW-E3-08 or SD101BW-E3-18
Single SB
SD101BW-HE3-08 or SD101BW-HE3-18
SD101CW
SD101CW-E3-08 or SD101CW-E3-18
Single SC
SD101CW-HE3-08 or SD101CW-HE3-18
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Repetitive peak reverse voltage
SD101AW V
RRM
60 V
SD101BW V
RRM
50 V
SD101CW V
RRM
40 V
Power dissipation (infinite heatsink)
(1)
P
tot
400 mW
Forward continuous current I
F
30 mA
Maximum single cycle surge 10 μs square wave I
FSM
2A
THERMAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to ambient air
(1)
R
thJA
300 K/W
Junction temperature
(1)
T
j
125 °C
Storage temperature range T
stg
-65 to +150 °C
Operating temperature range T
op
-55 to +125 °C