PC911L0NSZ0F
Series
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC911L)
2. Approved by VDE, DIN EN60747-5-2
(∗)
(as an
option), file No. 40008898 (as model No. PC911L)
3. Package resin : UL flammability grade (94V-0)
(∗)
DIN EN60747-5-2 : successor standard of DIN VDE0884
■ Features
■ Agency approvals/Compliance
1. Programmable controllers
2. Inverter
■ Applications
High Speed 15Mb/s, High CMR type
Dip 8 pin
∗
OPIC Photocoupler
1. 8 pin DIP package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High speed response
(t
PHL :
TYP. 27 ns, t
PLH :
TYP. 35 ns)
4. High noise immunity due to high instantaneous
common mode rejection voltage (CM
H
: MIN. 15
kV/µs, CM
L
: MIN. −15 kV/µs).
5. High isolation voltage between input and output
(V
iso(rms)
: 5.0 kV)
6. Lead-free and RoHS directive compliant
■ Description
PC911L0NSZ0F Series contains a LED optically
coupled to an OPIC chip.
It is packaged in a 8 pin DIP.
Input-output isolation voltage(rms) is 5.0kV, High
speed response (TYP. 15 Mb/s) and CMR is MIN.
15 kV/µs.
1
Sheet No.: D2-A05702EN
Date Jun. 30. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PC911L0NSZ0F Series
∗
"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing
circuit integrated onto a single chip.
