MP2604
Single-Cell 1A Linear Li-Ion
Battery Charger without Trickle Charge
MP2604 Rev. 1.2 www.MonolithicPower.com 1
1/25/2010 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP2604 is a linear, high-performance
single cell Li-Ion battery charger. By integrating
high voltage input protection into the charger IC,
the MP2604 can tolerate an input surge up to
28V.
The device features constant current (CC) and
constant voltage (CV) charging modes with
programmable charge currents (85mA to 1A),
programmable battery full threshold, thermal
protection, battery temperature monitoring and
reverse current blocking. The device also
provides AC adapter power good and charge
status indications to the system.
MP2604 is available in 10-pin 3mm x 3mm QFN
package.
EVALUATION BOARD REFERENCE
Board Number Dimensions
EV2604DQ-00A 2.0” x 1.9” x 0.6”
FEATURES
• Input Surge up to 28V
• Adapter or USB Input
• Programmable Charge Current: 85mA to 1A
• Proprietary Constant Voltage Auto Recharge
• Proprietary Over-Voltage Protection
• 0.75% V
BATT
Accuracy
• <1µA Battery Reverse Current
• 90µA Standby Current from V
IN
• Battery Temperature Monitoring
• Over Current Protection
• AC Adapter Power Good Indicator
• Charge Status Indicator
• Programmable Soft-Start
• Programmable Charge Termination Current
Threshold
• Tiny 3mm x 3mm QFN Package
APPLICATIONS
• Cell Phones
• MP3/Multimedia Players
• Smart Phones
• PDAs
• Digital Cameras
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP2604
BATT
ISET
IBF
SS
GND
10
9
8
7
6
IN
CHG
ACOK
EN
NTC
1
2
3
4
5
To system
I
BATT
V
BATT
+
_
3.5V - 28V
OFFON