© 2011 Cooper Bussmann
www.cooperbussmann.com
0111 BU-SB11019 Page 4 of 4 Data Sheet 4400
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-
port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result
in significant injury to the user.
Packaging/Taping Specifications
IEC Dimension Tolerance
Description Mark (mm) (mm)
Sprocket hole pitch P
0
12.7 0.3
Ordinate to adjacent component lead
PTR030V0090~PTR030V0300 P
1
3.6 1.0
Ordinate to adjacent component lead
PTR030V0400 P
1
3.45 1.0
Ordinate to adjacent component lead
PTR030V0500~PTR030V0900 P
1
7.3 1.0
Device pitch PTR030V0090~PTR030V0300 P 12.7 1.0
Device pitch PTR030V0400~PTR030V0900 P 25.4 1.0
Lead spacing C * --
Carrier tape width W 18 1.0
Top distance between tape edges W
0
3.0 Max.
Hold-down tape width W
1
12 1.0
Sprocket hole position W
2
9.0 +0.75/-0.5
Abscissa to top PTR030V0090~PTR030V0300 H
1
32.2 Max.
Abscissa to top PTR030V0400~PTR030V0900 H
1
47.5 Max.
Abscissa to plane (straight lead) H 18.0 +2/-0
Abscissa to plane (kinked lead) H
0
16.0 ±0.5
Sprocket hole diameter D
0
4 ±0.2
Lead protrusion L
1
1 Max.
Tape thickness t 0.9 Max.
Body lateral deviation Δ
h
0 ±1.0
Body tape plane deviation Δ
p
0 ±0 1.3
Reel width W
3
56 Max.
Reel diameter 340 ±10
Arbor hole diameter n
0
31 ±1
Core diameter n 80 Min.
* See Dimensions table.
Figure 1 - PTR030V0090-PTR030V0400
Figure 2 - PTR030V0500-PTR030V0900
Reel Specifications
