228
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Tape and Reel Packaging
Specifications
Standard Receptacles
Application Notes
Mating/Unmating —
Cable Plugs
Mating/Unmating
1. To mate the connectors,
insert the cable plug into
the SMT receptacle, mak-
ing sure the cable plug
is as vertical as possible
and the mating axis of
both connectors are
aligned. Do not insert on
an extreme angle.
2. To unmate the connectors,
insert the end portion of
the extraction tool under
the SMT receptacle con-
nector flanges and pull off
vertically in the direction
of the mating axis.
Permissible Load
Do not apply excessive
load to the cable after the
connectors are mated.
Please refer to the permissi-
ble loads indicated in the
figure to the right.
4N Max.
2N Max.
2N Max.
Dimensions Reel (2500 Pieces/Reel)
Soldering Profile —
SMT Receptacle
Recommended Temperature
Profile (Reference)
1. The preferred technique
for mounting the SMT
Receptacle package is to
reflow solder the device
onto a PCB (Printed
Circuit Board).
2. The maximum temperature
for the lead of PCB surface
does not exceed 240°C.
3. The right reflow soldering
profile is for reference and
will modify under individ-
ual different conditions.
Hand Soldering (Reference only)
1. Soldering iron: The
maximum temperature
is 240°C.
2. Soldering period: within
5 seconds.
Dimensions of Taping
