Series LP01
Short Body Pushbuttons
www.nkk.com
D69
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
D
Illuminated PBSlides Programmable
Toggles
Rockers
Touch
Tilt
MOUNTING TYPES
C
M
Bushing
.630” (16.0mm) Diameter
This mounting option is supplied
with a brass hexagon nut with nickel plating.
Snap-in
.669” (17.0mm) Diameter
K
HOUSING
Black
Housing available in black only. The one-piece body and bezel have a matte finish.
Recommended
Panel Thickness:
.079” ~ .256”
(2.0mm ~ 6.5mm)
Recommended
Panel Thickness:
.039” ~ .126”
(1.0mm ~ 3.2mm)
Allow .984” (25.0mm) distance from center-to-center
between switches when mounted side-by-side.
Allow .827” (21.0mm) distance from center-to-center
between switches when mounted side-by-side.
W01
CONTACT MATERIALS, RATINGS, & TERMINALS
Silver Power Level
Solder Lug/
.110” (2.8mm) Quick Connect
3A @ 125V AC/250V AC; 3A @ 30V DC
(7.3)
.287
Epoxy Seal
(2.8)
.110
(1.2)
.047
(2.0)
.079
Thk = (0.5)
.020
(0.6) R
.024
(16.0) Dia
.630
(1.7)
.067
(7.5)
.295
(25.0) Min
.984
+ 0.2
– 0.0
+ 0.0
– 0.1
+ 0.1
– 0.0
(1.1) R
.043
(17.3) Dia
.681
(18.1)
.713
(21.0) Min
.827
+ 0.2
– 0.0
+ 0.2
– 0.0
+ 0.2
– 0.0
Note: If used at 1A @ 125V AC/250V AC or 1A @ 30V DC,
electrical life will be 100,000 operations minimum.
LED COLORS & SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is isolated and requires external power source. Polarity marks are on the switch.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement section.
LEDs are an
integral part
of the switch
and are not
available
separately.
Colors Red Amber Green
Forward Peak Current
I
FM
30mA 30mA 30mA
Typical Forward Current
I
F
20mA 20mA 20mA
Forward Voltage
V
F
1.95V 2.0V 2.1V
Reverse Peak Voltage
V
RM
5V 5V 5V
Current Reduction Rate Above 25°C
∆I
F
0.41mA/°C 0.29mA/°C 0.39mA/°C
Ambient Temperature Range –10°C ~ +50°C
5D 5F5C
Single Color LED with 1 Element
(+) (-)
No Code
No Lamp