(mm)
qD×L
8×11.5
10×12.5
qd
0.6
0.6
P
3.5
5.0
α
1.5
1.5
Test condition
Capacitance change
tan b
ESR( 1)
Leakage current ( 2)
105°C, rated voltage 2000Hrs.
Within ±20% of initial value before test
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
–55 to +105°C
2.5 to 6.3V
390 to 1500μF
±20% at 120Hz, 20°C
Less than or equal to the specified value at 120Hz, 20°C
Less than or equal to the specified value at 100kHz, 20°C
Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C
Specifications
Performance CharacteristicsItem
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Endurance
Tangent of loss angle (tan b)
Leakage Current ( 2)
ESR ( 1)
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Aluminum case
Stand off
Wire(Lead free)
Dimensions
Type numbering system (Example : 6.3V 470μF)
Nichicon part number
5
5
-
0
'
1
.
;
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
5DWHGFDSDFLWDQFH)
5DWHGYROWDJH9
6HULHVQDPH
7\SH
FP
57Nm
471
6.3
/RW1R
3URGXFW/RJR
9ROWDJH
&DSDFLWDQFH
FPCAP part number
)3 5 5( 0 5 .
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
&DSDFLWDQFH
)
9ROWDJH9
6HULHVQDPH
7\SH
φD
±0.5
MAX.
P
±0.5
L+α
MAX.
15
MIN.
4
MIN.
φd
Ultra Low ESR, High ripple current.
correspondence.
Compliant to the RoHS directive (2011/65/EU).