517D107M016AA6AE3

517D
www.vishay.com
Vishay Sprague
Revision: 18-Jul-16
1
Document Number: 42053
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
+105 °C, General Purpose Miniature, Radial Lead
FEATURES
High CV per case size
•Low cost
Solvent resistant construction
(through 100 WV
DC
)
Life test to 2000 h at +105 °C
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in mm
0.197" x 0.433" [5.0 x 11.0]
to 0.709" x 1.575" [18.0 x 40.0]
Operating temperature
-55 °C to +105 °C
(6.3 WV
DC
to 100 WV
DC
)
-40 °C to +105 °C
(160 WV
DC
to 250 WV
DC
)
Rated capacitance range, C
R
0.47 μF to 15 000 μF
Tolerance on C
R
± 20 %
Rated voltage range, U
R
6.3 WV
DC
to 250 WV
DC
Termination 2 radial leads
Life validation test at 105 °C
2000 h: CAP ± 20 % from
initial measurement.
DF 2 x initial specified limit.
DCL initial specified limit.
Shelf life at 105 °C
1000 h: CAP ± 20 % from initial
measurement.
DF 2 x initial specified limit.
DCL initial specified limit.
DC leakage current
Rated voltage for 1 min for
6.3 WV
DC
to 100 WV
DC
units:
I < 0.03 CV or 4 μA
(whichever is greater).
Rated voltage for 2 min for
6.3 WV
DC
to 100 WV
DC
units:
I < 0.04 CV or 3 μA
(whichever is greater).
Rated voltage for 1 min for
160 WV
DC
to 250 WV
DC
units:
I < 0.1 CV + 40 μA and CV > 1000;
I < 0.04 CV + 100 μA
and CV > 1000
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE MULTIPLIERS
+70 °C 1.78
+85 °C 1.4
+105 °C 1.0
FREQUENCY (Hz)
WV
DC
CAP. (μF)
50 to
60
100 to
120
300 to
400
1 kHz 10 kHz
6.3 to
100
0 to 47 0.75 1 1.35 1.57 2.00
100 to 470 0.80 1 1.23 1.34 1.50
1000 to
22 000 000
0.85 1 1.10 1.13 1.15
160 to
250
0.47 to 100 0.80 1 1.25 1.40 1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z
(T)
/Z
(+20 °C)
MAXIMUM AT 120 Hz
RATED VOLTAGE
(WV
DC
)
Z - 25 °C / Z + 20 °C Z - 40 °C / Z + 20 °C
6.3 4.0 8.0
10.0 3.0 6.0
16.0 2.0 4.0
25.0 to 100.0 2.0 3.0
160.0 to 200.0 2.0 4.0
250.0 4.0 6.0
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL CASE SIZE
D x L
LEAD SPACING
S
NOMINAL LEAD DIAMETER
D
TYPICAL WEIGHT
(g)
JA 0.197 x 0.433 [5.0 x 11.0] 0.079 [2.0] 0.020 [0.50] 0.44
AA 0.248 x 0.433 [6.3 x 11.0] 0.098 [2.5] 0.020 [0.50] 0.63
BB 0.315 x 0.453 [8.0 x 11.5] 0.138 [3.5] 0.024 [0.60] 1.03
CC 0.394 x 0.492 [10.0 x 12.5] 0.197 [5.0] 0.024 [0.60] 1.53
CD 0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 0.024 [0.60] 1.86
CG 0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 0.024 [0.60] 2.48
DG 0.492 x 0.787 [12.5 x 20.0] 0.197 [5.0] 0.024 [0.60] 3.98
DK 0.492 x 0.984 [12.5 x 25.0] 0.197 [5.0] 0.024 [0.60] 5.27
517D
www.vishay.com
Vishay Sprague
Revision: 18-Jul-16
2
Document Number: 42053
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches [millimeters]
Notes
Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded “6”).
(1)
Formed lead.
(2)
Lead thickness Ø d depends on capacitor specification.
EK 0.630 x 0.984 [16.0 x 25.0] 0.295 [7.5] 0.031 [0.80] 7.72
EN 0.630 x 1.24 [16.0 x 31.5] 0.295 [7.5] 0.031 [0.80] 9.90
ER 0.630 x 1.40 [16.0 x 35.5] 0.295 [7.5] 0.031 [0.80] 11.10
FR 0.709 x 1.40 [18.0 x 35.5] 0.295 [7.5] 0.031 [0.80] 13.04
FV 0.709 x 1.575 [18.0 x 40.0] 0.295 [7.5] 0.031 [0.80] 15.74
DIMENSIONS in inches [millimeters]
FORMING METHOD FORMED LEAD CODE
DIMENSIONS
DSX (Max.)
Formed and cut F
0.197 [5.0] 0.197 [5.0] 0.059 [1.5]
0.248 [6.3] 0.197 [5.0] 0.098 [2.5]
0.315 [8.0] 0.197 [5.0] 0.098 [2.5]
Cut C
0.394 [10.0] 0.197 [5.0] -
0.492 [12.5] 0.197 [5.0] -
0.630 [16.0] 0.295 [7.5] -
0.709 [18.0] 0.295 [7.5] -
Snap-in S
0.197 [5.0] 0.197 [5.0] 0.059 [1.5]
0.248 [6.3] 0.197 [5.0] 0.059 [1.5]
0.315 [8.0] 0.197 [5.0] 0.059 [1.5]
0.394 [10.0] 0.197 [5.0] -
0.492 [12.5] 0.197 [5.0] -
0.630 [16.0] 0.295 [7.5] -
0.709 [18.0] 0.295 [7.5] -
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL CASE SIZE
D x L
LEAD SPACING
S
NOMINAL LEAD DIAMETER
D
TYPICAL WEIGHT
(g)
0.033 ± 0.006
[0.85 ± 0.15]
0.039 ± 0.008
[1.0 ± 0.2]
D
X
0.197 ± 0.20
[5.0 ± 0.5]
D
0.197 ± 0.20
[5.0 ± 0.5]
0.177
[4.5]
0.177
[4.5]
F
(1)
(4, 5, 6.3, 8)
(10, 12.5, 16, 18)
Code S
0.177
[4.5]
Code C
Ø d
(2)
D
S ± 0.20 [0.5]
F
(1)
F
(1)
Code F
0.177
[4.5]
0.197 ± 0.20
[5.0 ± 0.5]
Ø d
(2)
Ø d
(2)
Ø d
(2)
D
X
Code S
Code S
Code S
517D
www.vishay.com
Vishay Sprague
Revision: 18-Jul-16
3
Document Number: 42053
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
The ammo pack code is to be added at the end of type number in the 14th and 15th position as 8P. To specify formed, cut or snap-in leads
and for tape and ammo, both positions 14 and 15 of the type number must be filled in with the proper codes.
(1)
Except 0.394" [10.0 mm] and 0.492" [12.5 mm] diameter have straight unformed leads.
TAPING SPECIFICATIONS in inches [millimeters]
Formed Lead Type
TAPED CAPACITORS FOR AUTOMATIC INSERTION SYSTEMS in inches [millimeters]
PACKAGING
LEAD CODE
14th AND 15th DIGITS OF PN
SPECIFICATION
LEAD SPACE CAPACITOR SIZES AVAILABLE
LEAD STYLE
Ammo pack 8P Formed lead
(1)
0.197 [5.0]
0.197 x 0.433 [5.0 x 11.0] to
0.492 x 0.787 [12.5 x 25.0]
Case codes JA, AA, BB, CC, CD, DG, DK
DIMENSIONS in inches [millimeters]
ITEM
CASE SIZE
(Diameter x Length)
FORMED LEAD TYPE STRAIGHT LEAD TYPE
0.197 x 0.433
[5.0 x 11.0]
0.248 x 0.433
[6.3 x 11.0]
0.315 x 0.452
[8.0 x 11.5]
0.394 [10.0]
(Dia.)
0.492 [12.5]
(Dia.)
Ø d - Lead-wire diameter 0.020 [0.5] 0.020 [0.5] 0.024 [0.6] 0.024 [0.6] 0.024 [0.6]
P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0]
P
0
- Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0]
F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]
K - Clinch height 0.098 [2.5] 0.098 [2.5] 0.157 [4.0] - -
H - Height of component from tape center 0.728 [18.5] 0.728 [18.5] 0.787 [20.0] 0.728 [18.5] 0.630 [16.0]
H
0
- Lead-wire clinch height 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] - -
W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0]
W
0
- Hold down tape width 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0]
D
0
- Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0]
t - Total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7]
P
0
H
F
P
K
H
0
0
WW
D
0
t
Ø d

517D107M016AA6AE3

Mfr. #:
Manufacturer:
Vishay
Description:
Aluminum Electrolytic Capacitors - Leaded 100uF 16volts 20%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union