TE CONNECTIVITY, SWINDON, UK
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is
error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity
reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in
this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for
the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled.
This specification sheet, when used with RW-2500, defines the product characteristics and
performance of TE Connectivity Thin-Wall Marker Sleeves.
The printing system developed for this marker sleeve is now obsolete. TE can only guarantee the
physio-chemical nature of the product, and not any marking applied using non-recommended
printing systems. Where non-standard systems are used, customers are required to carry out their
own validation testing.
The sleeving shall be fabricated from irradiated, thermally stabilized, modified polyvinylidene fluoride
compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles,
seams, cracks or inclusions.
The sleeves shall be supplied in white, unless otherwise specified.
The sleeves shall meet the requirements of Table 3.
The sleeves shall be cut lengths in accordance with Table 1.
