DisplayPort to DVI over Cat5/6 Active Extender
Kit, Pigtail-Style Transmitter/Receiver,
Video/Audio, 1080/60p, Up to 125-ft.
MODEL NUMBER: B150-1A1-DVI
Transmitter and receiver work in tandem to convert a DisplayPort signal to DVI and extend it via Cat5e/6
cable to a projector, monitor or television up to 125 ft. away. Ideal for digital signs, schools and trade
shows.
Description
The B150-1A1-DVI DisplayPort to DVI over Cat5/6 Active Extender Kit includes a transmitter unit and a
receiver unit that work in tandem to convert a DisplayPort audio/video signal to DVI and then extend it to a
projector, monitor or television up to 125 feet away. The kit is ideal for digital signs, trade shows,
presentations, classrooms, churches, retail settings and other applications where the video source is
located farther than convention cables allow.
One Cat5e/6 cable connects the transmitter and receiver (for best results, use 24 AWG solid-wire Cat5e/6
cable, such as Tripp Lite’s N202-Series). A built-in DisplayPort plug connects the transmitter to the
source, while a built-in DVI-D single-link plug connects the receiver to the display. Included USB Micro-B
cables supply power to the units via USB ports on the source and display or USB wall chargers. No
external power supplies are needed.
The B150-1A1-DVI can extend a high-definition 1920 x 1080 (60 Hz) signal up to 125 feet. In addition to
crystal-clear video, including 24-bit True Color (8 bits per channel), the kit delivers full, rich stereo. LEDs
on the RJ45 ports indicate when the units are receiving power and a DVI signal from the source. Built-in
equalization control lets you fine-tune the image on the DVI display. Easy to set up with no software or
drivers to install. Compatible with all operating systems. Compliant with the Federal Trade Agreements
Act (TAA) for GSA Schedule purchases.
Features
Converts DisplayPort Signal to DVI, Extends It Up to 125 Ft.
Highlights
Supports high-definition video
resolutions up to 1920 x 1080
(60 Hz)
●
Supports 24-bit True Color (8
bits per channel) and stereo
audio
●
Included USB Micro-B cables
supply power to both units
●
Works with all operating
systems
●
Plug and play—no software or
drivers to install
●
HDCP 1.3 compliant
●
System Requirements
Computer with DisplayPort
output port*
●
Display with DVI-D input port
●
Package Includes
Transmitter unit
●
Receiver unit
●
Screwdriver for adjusting
equalization
●
(2) USB Micro-B cables, 3 ft.
●
Owner’s manual
●
1 / 3