OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL43L210IHZ-T7A

P1-P3P4-P6P7-P9P10-P12
1
®
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
FN6131.0
ISL43L210
Ultra Low ON-Resistance, +1.1V to +4.5V
Single Supply, SPDT Analog Switch
The Intersil ISL43L210 device is a low ON-resistance, low
voltage, bidirectional, single pole/double throw (SPDT)
analog switch designed to operate from a single +1.1V to
+4.5V supply. Targeted applications include battery powered
equipment that benefit from low on-resistance and fast
switching speeds (t
ON
= 7ns, t
OFF
= 3ns). The digital logic
input is 1.8V CMOS compatible when using a single +3V
supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL43L210 is offered in a 6 lead SC70 package, alleviating
board space limitations.
The ISL43L210 is a committed SPDT that consist of one
normally open (NO) and one normally closed (NC) switch.
This configuration can also be used as a 2-to-1 multiplexer.
Features
• Pb-free available (RoHS compliant)
• Drop In replacement for the MAX4714
• ON resistance (R
ON
)
-V
CC
= +4.3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.34Ω
-V
CC
= +3.0V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.38Ω
-V
CC
= +1.8V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.75Ω
•R
ON
matching between channels . . . . . . . . . . . . . . . 0.002Ω
•R
ON
flatness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06Ω
• Single supply operation . . . . . . . . . . . . . . . . . +1.1V to +4.5V
• Fast switching action (+3.9V Supply)
-t
ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7ns
-t
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3ns
• Guaranteed break-before-make
• ESD HBM rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >6kV
• 1.8V CMOS logic compatible (+3V supply)
• 6 lead SC70 package
Applications
• Battery powered, handheld, and portable equipment
- Cellular/mobile phones
- Pagers
- Laptops, notebooks, palmtops
• Portable test and measurement
• Medical equipment
• Audio and video switching
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
TABLE 1. FEATURES AT A GLANCE
Number of Switches 1
SW SPDT or 2-1 MUX
1.8V R
ON
0.75Ω
1.8V t
ON
/t
OFF
16ns/5ns
3V R
ON
0.38Ω
3V t
ON
/t
OFF
8ns/4ns
4.3V R
ON
0.34Ω
4.3V t
ON
/t
OFF
7ns/3ns
Package 6 Ld SC70
Data Sheet March 15, 2005
2
FN6131.0
March 15, 2005
Pinout (Note 1)
ISL43L210 (SC70)
TOP VIEW
NOTE:
1. Switches Shown for Logic “0” Input.
Truth Table
LOGIC PIN NC PIN NO
0OnOff
1OffOn
NOTE: Logic “0” ≤0.5V. Logic “1” ≥1.4V with a 3V supply.
Pin Descriptions
PIN FUNCTION
V+ System Power Supply Input (+1.1V to +4.5V)
GND Ground Connection
IN Digital Control Input
COM Analog Switch Common Pin
NO Analog Switch Normally Open Pin
NC Analog Switch Normally Closed Pin
4
5
6
1
2
3
IN
V+
GND
NO
NC
COM
Ordering Information
PART NO.
(BRAND)
TEMP.
RANGE (°C) PACKAGE
PKG.
DWG. #
ISL43L210IH-T
(CMA)
-40 to 85 6 Ld SC70
Tape and Reel
P6.049
ISL43L210IHZ-T
(CMA)
(See Note)
-40 to 85 6 Ld SC70
Tape and Reel (Pb-free)
P6.049
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
ISL43L210
3
FN6131.0
March 15, 2005
Absolute Maximum Ratings Thermal Information
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 4.7V
Input Voltages
NO, NC, IN (Note 2) . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Output Voltages
COM (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Continuous Current NO, NC, or COM . . . . . . . . . . . . . . . . . ±150mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . ±300mA
ESD Rating:
HBM >. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>6kV
MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>300V
CDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>1000V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C
Thermal Resistance (Typical, Note 3) θ
JA
(°C/W)
6 Ld SC70 Package . . . . . . . . . . . . . . . . . . . . . . . . . 590
Maximum Junction Temperature (Plastic Package). . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C
(Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
2. Signals on NC, NO, IN, or COM exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current ratings.
3. θ
JA
is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications - 4.3V Supply Test Conditions: V+ = +3.9V to +4.5V, GND = 0V, V
INH
= 1.6V, V
INL
= 0.5V (Notes 4, 6),
Unless Otherwise Specified
PARAMETER TEST CONDITIONS
TEMP
(°C)
(NOTE 5)
MIN TYP
(NOTE 5)
MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, V
ANALOG
Full 0 - V+ V
ON Resistance, R
ON
V+ = 3.9V, I
COM
= 100mA, V
NO
or V
NC
= 2.2V
(See Figure 5)
25 - 0.36 - Ω
Full - 0.4 - Ω
R
ON
Matching Between Channels,
∆R
ON
V+ = 3.9V, I
COM
= 100mA, V
NO
or V
NC
= 2.2V 25 - 0.002 - Ω
Full - 0.003 - Ω
R
ON
Flatness, R
FLAT(ON)
V+ = 3.9V, I
COM
= 100mA, V
NO
or V
NC
= 0.8V, 2.2V,
3.5V, (Note 7)
25 - 0.06 - Ω
Full - 0.08 - Ω
NO or NC OFF Leakage Current,
I
NO(OFF)
or I
NC(OFF)
V+ = 4.5V, V
COM
= 0.3V, 3V, V
NO
or V
NC
= 3V, 0.3V 25 -30 - 30 nA
Full -100 - 100 nA
COM ON Leakage Current,
I
COM(ON)
V+ = 4.5V, V
COM
= 0.3V, 3V, or V
NO
or V
NC
= 0.3V, 3V,
or Floating
25 -30 - 30 nA
Full -100 - -100 nA
DYNAMIC CHARACTERISTICS
Turn-ON Time, t
ON
V+ = 3.9V, V
NO
or V
NC
= 1.5V, R
L
= 50Ω, C
L
= 35pF
(See Figure 1, Note 8)
25 - 7 15 ns
Full - - 20 ns
Turn-OFF Time, t
OFF
V+ = 3.9V, V
NO
or V
NC
= 1.5V, R
L
= 50Ω, C
L
= 35pF
(See Figure 1, Note 8)
25 - 3 10 ns
Full - - 15 ns
Break-Before-Make Time Delay, t
D
V+ = 4.5V, V
NO
or V
NC
= 1.5V, R
L
= 50Ω, C
L
= 35pF
(See Figure 3, Note 8)
Full 1 3 - ns
Charge Injection, Q V
G
= V+/2, R
G
= 0Ω, C
L
= 1.0nF (See Figure 2) 25 - 25 - pC
OFF Isolation R
L
= 50Ω, C
L
= 5pF, f = 100kHz, V
COM
= 1V
RMS
(See Figure 4)
25 - -70 - dB
Crosstalk (Channel-to-Channel) R
L
= 50Ω, C
L
= 5pF, f = 100kHz, V
COM
= 1V
RMS
(See Figure 6)
25 - -70 - dB
ISL43L210
P1-P3P4-P6P7-P9P10-P12

ISL43L210IHZ-T7A

Mfr. #:
Buy ISL43L210IHZ-T7A
Manufacturer:
Renesas / Intersil
Description:
Analog Switch ICs SUB 1OHM S SW 1 1V TO 4 5V SPDT OR 2:1
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet