J–
32
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
LC Series
Subminiature Precision Snap-acting Switches
Features/Benefits
•
Compact design
•
Long life and high electrical capacity
•
Quick connect, wire lead or PC mounting
•
Wide variety of actuator styles
Typical Applications
•
Motorized equipment
•
Sump pump
•
Thermostatic controls
Specifications
CONTACT RATING: From low level* to 10.1 AMPS @ 250 V AC.
ELECTRICAL LIFE: 100,000 cycles
INSULATION RESISTANCE: 1,000 M
οηµ min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERA
TING TEMPERATURE: –17ºF to 185ºF (–25ºC to 85ºC).
OPERATING FORCE: From 142 to 170 grams at actuator button.
Forces are less at free end of lever actuators; (see OPERATING
FORCE and ACTUATOR option sections).
MOUNTING: 2-56 scr
ews, torque 2.3 in/lbs max.
* Low Level=conditions wher
e no arcing occurs during switching, i.e., 0.4 VA max. @
20 V AC or DC max.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service center.
Materials
SWITCH HOUSING: Thermoplastic polyester or high temperature
thermoplastic (PTS) (UL 94V
-0).
ACTUA
TOR BUTTON: Thermoplastic polyester (UL 94V-0).
SPRING: Copper alloy.
PIVOT: Copper alloy.
MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP
@ 125 V AC. Fine silver with 24K gold plate for 1 AMP @
125 V AC or less.
STATIONARY CONTACTS: Fine silver welded on copper alloy for
ratings greater than 1 AMP @ 125 V AC. Gold alloy welded
on copper alloy for ratings less than 1 AMP @ 125 V AC.
TERMINALS: Copper alloy.
TERMINAL SEAL: Epoxy.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-33 through J-35. For additional options not shown in catalog, consult Customer Service Center.
Series
LC
SP, Mom.
Operating For
ce
GG
5 oz./142 grams
GD 3.3 oz./94 grams
GH 6 oz./170 grams
Electrical Rating
X1
UL 61058-1 (see chart)
V6 UL
61058-1 (see chart)
V7 UL 61058-1 (see chart)
F5 UL
1054 (see chart)
L9 UL 1054 (see chart)
M1 UL 1054 (see chart)
Actuator
P00
Pin plunger
A10 .28" lever roller
,
high force
A15 .51" lever roller, high force
A20 .39" lever roller
, low force
A25 .61" lever roller
,
lo
w force
T10 .29" lever, high force
T13 .22" simulated roller, high force
T15 .57" lever
,
high force
T20 .38" lever
,
lo
w force
T23 .32" simulated roller, low force
T25 .67" lever, low force
Terminations
E
Solder
H .110" quick connect
J Wire lead
L Left formed PC thru-hole
R Right formed PC thru-hole
S PC Thru-hole
Circuitry
C
SPDT
W SPST N.C.
Y SPST N.O.
Electrical Life
NONE
6,000 oper
ations
U* Extended 100,000 operations
L C
Seal
NONE
(STD
.) No seal
E Epoxy seal
* Extended operations only available on Electrical Rating options F5, L9 and M1
UL61058-1
