NCV4275C
http://onsemi.com
2
PIN FUNCTION DESCRIPTION
Pin No.
Symbol Description
DPAK−5
D2PAK−5
1 I Input; Battery Supply Input Voltage. Bypass to ground with a ceramic capacitor.
2 RO Reset Output; Open Collector Active Reset (accurate when I > 1.0 V).
3, TAB GND Ground; Pin 3 internally connected to tab.
4 D Reset Delay; timing capacitor to GND for Reset Delay function.
5 Q Output; ±2.0%, 450 mA output. Bypass with 22 mF capacitor, ESR < 4.5 W (5.0 V Version),
3.5 W (3.3 V Version).
MAXIMUM RATINGS
Rating Symbol Min Max Unit
Input Voltage V
I
−42 45 V
Input Peak Transient Voltage V
I
− 45 V
Output Voltage V
Q
−1.0 16 V
Reset Output Voltage V
RO
−0.3 25 V
Reset Output Current I
RO
−5.0 5.0 mA
Reset Delay Voltage V
D
−0.3 7.0 V
Reset Delay Current I
D
−2.0 2.0 mA
ESD Susceptibility (Note 1) − Human Body Model
− Machine Model
− Charge Device Model
ESD
HBM
ESD
MM
ESD
CDM
4.0
200
1000
−
−
−
kV
V
V
Junction Temperature T
J
−40 150 °C
Storage Temperature T
stg
−55 150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device incorporates ESD protection and is tested by the followign methods: ESD Human Body Model tested per AEC−Q100−002, ESD
Machine Model tested per AEC−Q100−003, ESD Charged Device Model tested per AEC−Q100−011, Latch−up tested per AEC−Q100−004.
OPERATING RANGE
Rating Symbol Min Max Unit
Input Voltage Operating Range, 5.0 V Output V
I
5.5 42 V
Input Voltage Operating Range, 3.3 V Output V
I
4.4 42 V
Junction Temperature T
J
−40 150 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the
Recommended Operating Ranges limits may affect device reliability.
LEAD TEMPERATURE SOLDERING REFLOW AND MSL (Note 2)
Rating Symbol Min Max Unit
Lead Free, 60 sec−150 sec above 217°C T
SLD
− 265 Peak °C
Moisture Sensitivity Level MSL 1
